Re: AS/SET generation code

["Doug McLauchlan" <Doug.McLauchlan@xxxxxxxxxx>]

Go into the Data Model, press F16 and set Unique Access Path to Y. Then
regen the program.  

Doug McLauchlan

-----Original Message-----
From: bpcs-l-bounces+doug.mclauchlan=planar.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+doug.mclauchlan=planar.com@xxxxxxxxxxxx] On
Behalf Of Liliana Posso
Sent: Wednesday, February 07, 2007 4:14 PM
To: 'SSA's BPCS ERP System'
Subject: Re: [BPCS-L] AS/SET generation code

The are no logicals on that work file. Is a keyed file without logical


-----Original Message-----
From: bpcs-l-bounces+liliana_posso=charter.net@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+liliana_posso=charter.net@xxxxxxxxxxxx] On Behalf
Of Dan Sweeney
Sent: Wednesday, February 07, 2007 7:09 PM
To: 'SSA's BPCS ERP System'
Subject: Re: [BPCS-L] AS/SET generation code

The reason that it generated an extra file with and X is because within
the database definitions, you have to make sure that links from the
logical files to the physical are unique.  If not AS/Set will gen the
file with the X suffix.

Dan Sweeney
Senior Technical Consultant
PHOENIX Business Consulting, Inc.
Tel: 860-432-9881, Cell:  860.490.6712,
Fax: 860-432-9881
www.phoenixbcinc.com




-----Original Message-----
From: bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx
[mailto:bpcs-l-bounces+dsweeney=phoenixbcinc.com@xxxxxxxxxxxx] On Behalf
Of Liliana Posso
Sent: Wednesday, February 07, 2007 6:50 PM
To: bpcs-l@xxxxxxxxxxxx
Subject: [BPCS-L] AS/SET generation code

I compiled an AS/SET program using a work file and the RPG source code
is
generating an extra work file with an X at the end.

Did somebody know why this is happening?