RE: Is anyone using IASP with Domino

["Andy Nolen-Parkhouse" <aparkhouse@xxxxxxxxx>]

Bob,

The 820 will support only one HSL loop, I don't believe that this is an
upgradeable capacity.  It would still be possible to do what you
describe, but if I understand your disk usage, you would need a third
tower.  Each standalone system would have a dedicated 5074 tower with a
third 5074 being switchable between the two systems.  All five towers
would be part of the same HSL loop.  (I'm reasonably sure that you can
have five devices on a single loop, but don't take this to the bank.)

Perhaps IBM would be willing to do some work with you on this, it sounds
(from Mr. Scanlan's earlier post) like they do not yet have a reference
account for this nifty iSeries/Domino capability.

Regards,
Andy Nolen-Parkhouse



> -----Original Message-----
> From: domino400-admin@midrange.com
[mailto:domino400-admin@midrange.com]
> On Behalf Of Bob Larkin
> Sent: Wednesday, October 02, 2002 9:23 PM
> To: domino400@midrange.com
> Subject: Re: Is anyone using IASP with Domino
>
> Ouch, I didn't realize the switching portion of IASP was chargeable.
As
> P10s, thats over $8K.
> We have the 820 maxed on drives, as well as 2 5074s on each system
> (approx 1.2T per system)
> But we have a large quantity and volume of unreplicated application
DBs.
> Was planning on moving one 5074 to a seperate HSL loop between the
> systems. Ooops, I wonder if I will need additional HSL adapters on the
> 820s. I'll need to check that also.
>
> Thanks for helping me find the holes in this plan. At this rate, Disk
> would be cheaper, if the darn 5074 wasn't so expensive.
> Bob