RE: Domino setup for Quickr install

[Gary.Wade@xxxxxxxxxxxxxxxxx]

I'm running Quickr8 on a domino partiion on an V5R4 platform.  Just FYI:

Previously I was at R702 server, 8001Quickr and upgraded to R8.1 and 
Quickr 8.1 HX 3.

Previously Quickr was working ok.  After upgrade I found (1) I could not 
create an Online Meeting with my Sametime server in a site, (2) Awareness 
did not display consistently in a site, and (3) a button that allowed an 
Author or Editor to create new maintenance request no longer displayed 
unless you log in as a Manager or above.

Got an IBM support call in at this time
------------------------------------------------------------------------------
Gary L Wade
Lotus Notes Administrator
Blackberry Administrator
City of Orlando
400 S. Orange Ave.
PO Box 4990
Orlando, FL  32802-4990
(PH) 407-246-3796 
(FAX) 407-246-2878
(CELL) 321-229-6468
gary.wade@xxxxxxxxxxxxxxxxx

Florida has a very broad public records law.  As a result, any written 
communication created or received by City of Orlando officials and 
employees will be made available to the public and media, upon request, 
unless otherwise exempt.  Under Florida law, email addresses are public 
records.  If you do not want your email address released in response to a 
public records request, do not send electronic mail to this office. 
Instead, contact our office by phone or in writing.




From:
"Crump, Mike" <Mike.Crump@xxxxxxxxxxxxxxxx>
To:
"Lotus Domino on the iSeries / AS400" <domino400@xxxxxxxxxxxx>
Date:
05/29/2008 08:38 AM
Subject:
RE: Domino setup for Quickr install



Nathan,

I don't see anything incorrect.  I'm actually going to be doing this
today and tomorrow morning.  After reading your note I went back and
reviewed (again) the preparing, installing, and configuration chapters
in the Quickr infocenter
http://publib.boulder.ibm.com/infocenter/lqkrhelp/v8r0/index.jsp I am
not seeing anything that would lead me to see how your error could be
occurring.  It looks to me like there are a few 'configuration' settings
that are pretty minor and standard(entry to standard version, binding to
IP addy, etc.) but nothing that seems to be security related.  There is
a good section on security but I see nothing in there that says this
must be done before you can use it kind of language.

You have me worried now.  I will let you know if I run into any problems
or successes. 
 
Michael Crump
 
Manager, Computing Services
Saint-Gobain Containers, Inc.
1509 S. Macedonia Ave.
Muncie, IN  47302
 
765.741.7696
765.741.7012 f 
 


Motivation
If a pretty poster and a cute saying are all it takes to motivate you,
you probably have a very easy job. The kind robots will be doing soon.

-----Original Message-----
From: domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx
[mailto:domino400-bounces+mike.crump=saint-gobain.com@xxxxxxxxxxxx] On
Behalf Of Nathan Simpson
Sent: Thursday, May 29, 2008 12:33 AM
To: domino400@xxxxxxxxxxxx
Subject: Domino setup for Quickr install

Hi,

I have been chatting with Chris about this and to get a few more heads 
thinking about it I thought it might be a good idea to post here as
well.

We have Domino 8.0.1 and Sametime 8.0.1 (on another partition). We are
now 
looking at Quickr 8.1 to also run on our iSeries running V5R4.

Right from the beginning I have been unable to create a place. It
doesn't 
matter if we have security on or not. No Places can be created. We have
also 
been getting these messages from the very start.

05/28/2008 16:20:50 Attempt by CN=QUICKR/O=AWH/C=AU to create duplicate 
template h1_contacts in database 
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Contacts1.nsf
-rejected.

05/28/2008 16:20:56 Attempt by CN=QUICKR/O=AWH/C=AU to create duplicate 
template h1_meetingroom in database 
/LOTUS/DOMINO/QUICKR/DATA/LotusQuickr/tempplace1/Main.nsf - rejected.

'tempplace1' is the Place I am trying to create

I have read different things and Chris has opened my eyes to a few
things so 
I ended up wiping everything to try and start again. Chris made it sound

like a permissions error somewhere, and from my reading it looks like
the 
Quickr permissions are ok. So I thought it might be a Domino setup
problem.

He is the command I used to setup the Quickr Domino parition

CFGDOMSVR SERVER(QUICKR)
             OPTION(*ADD)
             DTADIR('/LOTUS/DOMINO/QUICKR/DATA')
             TIMEZONE(ZE10)
             NABSVR(AWH400)
             ADDSVRID('/Path/DominoID/ServerCertID/quickr.id')
             WEB(*HTTP)
             CNNSRV(*NONE)
             CNTRYID(AU)
             OUNAME(*BLANK *GEN)
             CERTID('/Path/DominoID/ServerCertID/cert.id' password)
             ADMID('/Path/DominoID/ServerCertID/user.id' password)
             SVRID('/Path/DominoID/ServerCertID/server.id')
             AUTOSTART(*YES)
           LOGREPEVT(*NO)
           LOGSSNEVT(*NO)
           TCPOPT(*NOENCRYPT QUICKR.AWH.COM.AU)
           SVRHSTNAME(quickr.awh.com.au)
           SBS(DOMINO03)
           ADLSRV(*RNRMGR *AMGR *ADMINP *REPLICA)
           TEXT('AWH Quickr Server')

Am I missing anything? Should there be any special Domino setup
parameters 
that I should set for Quickr? What about after the initial setup of
Domino? 
Anything to change before I load Quickr? In particular security
settings?

Thanks