Re: What ports need to be opened for Lotus Domino Quickr?

[Shuang Hong Wang <wangshh@xxxxxxxxxx>]

Comments in blue.

We have Lotus Domino Quickr installed in our DMZ.  I can get to
http://xqp02.dekko.com
internally.  What ports need to be opened to access it from the outside
world?  Just port 443 (if HTTPS is used) or 80 (for normal HTTP)?
Yes, we recommend the Domino default ports: 443 or 80.
What happens if the click on the link to install the connectors?  Will they

install?  Will they work?
It will pop up a window ask you "Run" or "Save". If you select "Run", it
will install the Connectors to your client. If you select "Save", it will
allow your save the executable file to your client. Run the file to install
Connectors when needs.
First issue last night was the network consultant gave me a new address,
that was already in use by another mac address!  See DSPMSG QSYSOPR for
TCP1B21 - WARNING: Host 0050568E2140 also using IP 208.87.180.39.
I think that another application use http service and port 80 with the same
ip address. Pls contact your network consultant to help resolve this.
I tried searching for quickr ports but all I got was for ports if you are
using Websphere Quickr.


Best Regards
______________________________________
Shuang Hong, Wang(王双红)
Software Engineer | Lotus Domino for IBM i
Tel: +86 10 82452360 | E-mail: wangshh@xxxxxxxxxx
IBM, China Systems and Technology Laboratory(CSTL)
Addr: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian
District Beijing P.R.China 100193
The world itself is a mirror, where you can see what you are looked like!


                                                                                                                                                     
  From:       rob@xxxxxxxxx                                                                                                                          
                                                                                                                                                     
  To:         domino400@xxxxxxxxxxxx                                                                                                                 
                                                                                                                                                     
  Date:       02/16/2011 10:05 PM                                                                                                                    
                                                                                                                                                     
  Subject:    What ports need to be opened for Lotus Domino Quickr?                                                                                  
                                                                                                                                                     





We have Lotus Domino Quickr installed in our DMZ.  I can get to
http://xqp02.dekko.com
internally.  What ports need to be opened to access it from the outside
world?  Just port 443 (if HTTPS is used) or 80 (for normal HTTP)?  What
happens if the click on the link to install the connectors?  Will they
install?  Will they work?

First issue last night was the network consultant gave me a new address,
that was already in use by another mac address!  See DSPMSG QSYSOPR for
TCP1B21 - WARNING: Host 0050568E2140 also using IP 208.87.180.39.

I tried searching for quickr ports but all I got was for ports if you are
using Websphere Quickr.

Rob Berendt
--
Group Dekko
Dept 1600
Mail to:  2505 Dekko Drive
          Garrett, IN 46738
Ship to:  Dock 108
          6928N 400E
          Kendallville, IN 46755
http://www.dekko.com

_______________________________________________
This is the Lotus Domino on the iSeries / AS400 (Domino400) mailing list
To post a message email: Domino400@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/domino400
or email: Domino400-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/domino400.