RE: Twinax Card and Win95

[Wolfgang Bröker <wolfgang@xxxxxxxxxxx>]

Jerry Draper schrub am Fri, 2 May 1997 11:09:58 -0700 (PDT):
> This is a known problem with IBM/Clone twinax cards failing in 
> high speed pentiums.  In every case where this is a problem, 
> installing a Synapse "smart" microprocessor based card has solved 
> the problem.  No IRQ, no DOS TSR, no shared RAM problems.

I worked successfully with adapters from BOS in Pentium machines up 
to 166 MHz (never tried with a 200 MHz processor). These adapters 
also don't use an IRQ if run in their native mode. IBM register 
compatible mode is supported as well. Look at http://www.bosusa.com.

Gruß - Wolfgang (not affiliated with any twinax board manufacturer)

-- 
***  This message was swisstimed by sntp://bernina.ethz.ch  ***
***                Sat, 03 May 1997 10:21 +0200             ***


* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *