Fwd: PM/400 usage in a network

[Mark Bauman <mlbauman@xxxxxxxxxxxx>]

      Can we measure the performance of remote systems (which are on LAN). 
      I have PM/400 installed on one of my system. 

      Thanks for any help. 

      phanihr@inf.com 




 From: Kurt C. Thompson  RCHVMW2(KCT990)  T/L 456-6547 
 Global Services Offerings Team,  Rochester, MN 

 PM/400 does support a network of systems. This is documented in chapter 
 entitled 'Work with Remote AS/400 Systems' in the PM/400 manual. 

 Briefly, you define a system to be the primary (hub) when running the 
 CFGPM400 command by responding 'Yes' to 'Receive data from other AS/400s'. 

 The secondary system (remote) would respond 'No' to 'Send data to IBM'. 

 Then on the primary you complete the setup by: 

   GO QMPGLIB/PM400     (Takes you to the PM/400 Menu) 
   Select 8 - Work with Remote AS/400 Systems. 

 I suggest you review the documentation first, as you will need to know some 
 communications information. 

 Kurt C. Thompson, PM/400 Team Leader 








* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *