Re: Problems with SNADS

[Carl Galgano <cgalgano@xxxxxxxxxxxxxxxxx>]

Greg:
In SNADS you need to have 2 distribution entries set up using WRKDIRE.
Lets consider this example.  You have 2 AS400s, one called SYSTEMA and the
other called SYSTEMB.  Assume GREGW is a user on both systems.  You should
have an entry on SYSTEMA for GREGW SYSTEMA that associates your local user
ID to your SNADS address on SYSTEMA.  You should also have an entry for
*ANY SYSTEMB that references SYSTEMB as the system name.  This entry allows
you to send to any user on SYSTEMB.  On SYSTEMB your should have an entry
for GREGW SYSTEMB tying your local user profile on SYSTEMB to your SNADS
address on SYSTEMB, as well as an entry for *ANY SYSTEMA that references
SYSTEMA as the system name.

You also need to configure SNADS using the CFGDSTSRV command.  Option 1
creates the distribution queue to the remote system (on SYSTEMA create a
queue for SYSTEMB and vis a versa).  Option 2 allows you to tie the queue
to the remote system name.  You should not need to config option 3.

Also be sure you have QSNADS started on both systems, you may need to
change your system startup job to start QSNADS automatically at IPL.

HTH,
Carl


At 08:23 AM 8/18/97 -0500, you wrote:
>Hi,
>
>I am having problems trying to sndnetf or sndnetsplf or anything to do
>with SNADS.  We just got another AS/400 in and we have TCP/IP &
>APPN/APPC working  between the 2 systems.  The error message that we get
>when we try to do sndnetf or spool file is "Distribution to user GREGW
>PPCDEV not done; user ID is not valid."  Now according to the error
>message the problem might be that the User is not in the System
>directory the ID is in the system directory.  It also talks about the ID
>being reset.  As far a I can tell it is not being reset.  I would
>appreciate it if anyone could shed some light on this, or suggest things
>to check. 
>
>Thanks,
>
>Greg Weber (IGRWU@Packerland.com)
>Greg Weber
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>* This is the Midrange System Mailing List!  To submit a new message,   *
>* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
>* this list send email to MAJORDOMO@midrange.com and specify            *
>* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
>* should be directed to the list owner / operator: david@midrange.com   *
>* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
>
Carl J. Galgano
cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *