Re: AS/400 Ethernet configuration

[Carl Galgano <cgalgano@xxxxxxxxxxxxxxxxx>]

That should be about it.  The CISC Ethernet cards do not come with an
Ethernet transciever (converts the thick ethernet to 10 base T), so if you
are going to connect to a 10baseT network/hub be sure to pick one up.
It'll run you abour 50 bucks.  Good luck.
Carl


At 10:29 AM 12/1/97 -0500, you wrote:
>
>
>
>Hello list,
>I have an opportunity to do some configuration work for a nearby company.
>One of the things they've asked about is installing an Ethernet card. I
>don't have specific model information, but they have a 9404 or 9406 CISC
>model AS/400. Is there any thing involved in the card installation other
>than the following?
>
>1. Check system value QAUTOCFG, make sure it is set to 1
>2. PWRDWNSYS RESTART(*NO)
>3. Install Ethernet card in free slot.
>4. Restart system
>5. STRSST, and ensure that the card was recognized properly, determine
>resource name.
>6. Assign a line description to the resource, vary it on, and begin
>testing.
>
>TIA,
>Jeff
>
>Jeff Velten, Operations Analyst
>The AT-A-GLANCE Group - http://www.at-a-glance.com
>Phone: (607) 563-9411 x679
>Fax: (607) 563-8811
>
>
>+---
>| This is the Midrange System Mailing List!
>| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
>| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
>| Questions should be directed to the list owner/operator: david@midrange.com
>+---
>umidr
>
Carl J. Galgano
http://cgalgano.home.mindspring.com
mailto:cgalgano@ediconsulting.com
EDI Consulting Services, Inc.   
540 Powder Springs Street
Suite C19
Marietta, GA 30064
770-422-2995
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---