Re: System resetting to default Date & Time -- MIDRANGE-L

Neil,

Thank you for this information.  I working the PTF Alert the other day and
found a prerequisite PTF on our system with a date of 1928.08.23.  I had
not had a chance to investigate further, thanks again for the info.
----------
> From: Neil Palmer <npalmer@NxTrend.com>
> To: 'MIDRANGE-L@midrange.com'
> Subject: System resetting to default Date & Time
> Date: Friday, January 02, 1998 5:28 AM
> 
> FYI
> 
> Several months ago there was a discussion of problems caused when the
> system date & time on a RISC processor AS/400 was reset to the default
> (1928/08/23) after power had been lost to the control panel (usually
> after a service action).  If a manual IPL was done the date/time were
> cleared and you were forced to enter them.  But on a normal IPL the
> system would come up with the default date/time.
> With these PTF's (already on cum packages) the system will force a
> manual IPL if it has reset to the default date/time.
> (Unfortunately, there does not appear to be a PTF for either V3R6 or
> V3R7).
> 
> PTF List:
>   Release 410   : SF42278 available 97/07/22 (7217 )
>   Release 414   : SF45311 available 97/12/04 (1000 )
> 
> APAR Identifier ...... SA66023       Last Changed..97/12/04  
>   IPL-INCORROUT DATE AND TIME ALLOWED TO DEFAULT ON IPL
>  
>    Symptom ...... IN INCORROUT         Status ........... CLOSED  PER
>   Severity ................... 2      Date Closed ......... 97/07/16
>   Component .......... 5769SS100      Duplicate of ........
>   Reported Release ......... 410      Fixed Release ............ 999
>   Component Name 5769 BASE V4         Special Notice
>   Current Target Date ..              Flags
>   SCP ...................
>   Platform ............
>  
>   Status Detail: SHIPMENT - Packaged solution is available for shipment.
>  
>   PTF List:
>   Release 410   : SF42278 available 97/07/22 (7217 )
>   Release 414   : SF45311 available 97/12/04 (1000 )
>  
>    ERROR DESCRIPTION:
>   The Time of Day (TOD) defaults back to the system default
>   instead of being set at the TOD that was being used by the
>   system before the last IPL.  This usually happens after a
>   service action such as replacement of an MFIOP, System Control
>   Panel, or any other hardware action that requires the power to
>   TOD clock to be lost.  These failures happen on V3R6.0 and
>   V3R7.0 levels of RISC code.
>  
>   PROBLEM SUMMARY:
>   When a customer changes their hardware configuration, such as
>   replacing an IOP like the service processor, the system date
>   gets defaulted.  The system should be IPLed in MANUAL mode to
>   set the date, but this is not a requirement.  It is possible for
>   the customer to IPL in NORMAL mode, and have a corrupted system
>   date on their machine.
>  
>   When the system date is defaulted, it gets set to August 23,
>   1928.  Some of the problems customers can see are scheduled jobs
>   which fail to run, applications containing an incorrect date
>   field, profiles with expired passwords and expired license keys.
>  
>   If the system date is lost and an IPL occurs, on a MANUAL or
>   attended IPL, the date and time fields are cleared on the IPL
>   options panel and the customer is forced to enter a valid date
>   in order to continue the IPL.  This is how it works today.  On a
>   NORMAL or unattended IPL, the system will now force the IPL into
>   a MANUAL or attended IPL.  This is new.  When this occurs, the
>   system will sit at the initial SIGNON screen waiting for the
>   customer to continue the IPL, and then will see all other normal
>   screens associated with a MANUAL or attended IPL.  A message
>   will be sent to QHST and QSYSOPR explaining what happened to the
>   IPL and it is MSGCPF095A with the following text:
>  
>   Message . . . . :   IPL changed from unattended to attended mode
>  
>   Cause . . . . . :   The start operating system function has been
>   changed from unattended to attended because the system date was
>   set to the default.
>  
>   Recovery  . . . :   Enter a new system date on the IPL options
>   screen.  The system date was set to the default.  The IPL was
>   changed from unattended to attended to allow a new system date
>   to be entered.
>  
>   On an install, the customer is already required to provide a
>   date and time, and the system date and time are updated.  There
>   are no changes required for an install.
>  
>   PROBLEM CONCLUSION:
>   The system will not allow an unattended IPL after the system
>   date has been set to the default.
>  
> ... Neil Palmer                                     AS/400~~~~~      
> ... NxTrend Technology - Canada     ____________          ___  ~     
> ... Thornhill, Ontario,  Canada     |OOOOOOOOOO| ________  o|__||=   
> ... Phone: (905) 731-9000  x238     |__________|_|______|_|______)   
> ... Cell.: (416) 565-1682  x238      oo      oo   oo  oo   OOOo=o\   
> ... Fax:   (905) 731-9202         ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
> ... mailto:NPalmer@NxTrend.com          http://www.NxTrend.com
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
> | To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator:
david@midrange.com
> +---
> uucp
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to "MIDRANGE-L@midrange.com".
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---