Re: Wanna have some fun?

[Gary L Peskin <garyp@xxxxxxxxxxxx>]

Kevin --

Have you checked to see if the "connector" on the drive is really an
adapter.  This happened to me with a quarter inch drive.  It looked like
the connector on the back was incompatible with the cable to plug into
it but when I pulled hard on the connector (on the suggestion of a
friend), it turned out to be an adapter than came off.

If that doesn't work, maybe the reverse will.  Is there an adapter that
will convert from your existing connector to the one on the 500.

Just a thought,
Gary

Kevin Watkins wrote:
> 
> Try moving an internal 8mm tape from model 200 to model 500... IBM is still
> scratching its head after MONTHS of going back and forth... the feature
> codes are supposed to be the same but the drive from the 200 has a different
> connector than the backplane of the 500.... Anyone got any ideas????
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

-- 
Gary L Peskin
The Firstech Corporation
+1.323.658.1146
http://www.simdate.com
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---