Re: NetServer: How to autostart

[Rob Berendt <rob@xxxxxxxxx>]

I have STRSBS  QSERVER and STRTCP in my startup job.  Still, NetServer was not 
started.  I'll try adding the CALL below to my
startup program and see if that works.  Judging by the fact that it should have 
started I should probably put an automatic
check in there to assure that it does with the additional CALL.



CALL QZLSSTRS PARM ('0' x'00000000') 
Start NetServer. See the QZLSSERVER job under the QSERVER subsystem. The 
QZLSSERVER is automatically started every time the QSERVER subsystem is 
started. 

'0' - Reset (0 indicated no reset) 
x'00000000' - used in lieu of error code structure 





bdietz@3x.com on 03/18/99 10:04:24 PM
Please respond to MIDRANGE-L@midrange.com@Internet
To:     MIDRANGE-L@midrange.com@Internet
cc:      

Subject:        Re: NetServer: How to autostart



The best way I have found to "get it started" after an IPL is to change you
startup program.  Since the NetServer runs in QSERVER
subsystem and is dependant on TCP/IP services put you STRTCP before the
QSERVER subsystem start.
Some more info can be found here-->
http://www.as400.ibm.com/netserver/apiminiguide.htm


Bryan Dietz
3X Corp.











Rob Berendt <rob@dekko.com> on 03/18/99 12:31:08 PM

Please respond to MIDRANGE-L@midrange.com
                                                                           
                                                                           
                                                                           


                                                              
                                                              
                                                              
 To:      MIDRANGE-L@midrange.com                             
                                                              
 cc:      (bcc: Bryan Dietz/Columbus/3X Corp)                 
                                                              
                                                              
                                                              
 Subject: NetServer: How to autostart                         
                                                              








How do I get NetServer to autostart?  I don't want to have to click on
icons just because I ipl'ed my 400.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---







+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---