Re: GA/400 via Telnet

["Robert E. Burger" <rburger@xxxxxxxxxxxxxxxxx>]

-----Original Message-----
From: bdietz@3x.com <bdietz@3x.com>
To: MIDRANGE-L@midrange.com <MIDRANGE-L@midrange.com>
Date: Saturday, May 29, 1999 8:24 AM
Subject: Re: GA/400 via Telnet



>Robert,
>It's a piece of cake.  Take a look at the GA400.ini  file.  you need to
>change it -or- you need to change the shortcut to
>the executable.  The trick is to make telnet the default connection.

>I usually change the default to  Telnet.  If you change the shortcut use
>these switches  /E:telnet /H:IPhostname

Thanks for the input... Unforunately, I had already tried both the INI mods
and the command line parms.  It seems to me that I have some other conflict
either  wth hardware, or more likely other installed software.  Anyhow, I
appreciate the attempt and the caveats you listed below.

>There was only a couple of things I do not like when using GA this way.  No
>pasting into the emulator session.
>and when you print the screen to a PC printer it prints as a bitmap image.

>Bryan Dietz
>3X Corp.

--Robert





"Robert E. Burger" <rburger@TarrantCounty.com>@midrange.com on 05/28/99
05:30:31 PM

Please respond to MIDRANGE-L@midrange.com

Sent by:  owner-midrange-l@midrange.com


To:   <MIDRANGE-L@midrange.com>
cc:

Subject:  GA/400 via Telnet



I am currently attempting to migrate to a pure  TCP/IP environment.
Originally, I set up GA/400 to utilize the Internal  emulator which
connects via NS/Router through an NetWare for SAA server.   Recently, I
have tried to switch to the Telnet connection method with NO  luck. Using
the telnet connection method, GA/400 loads but just sits on  the splash
screen forever. I can telnet to the AS/400 with no problem from  other
applications like PC5250, the WinNT TELNET.EXE program and from Mocha
TN5250. There are no relevant entries in the Telnet server  joblog.

I have tried this from the following PC  configurations: WinNT 4.0, Service
Packs 4 and 5, GA/400 V3R2M0 and OS/400  V4R2M0.

If anybody has any ideas or suggestions, I'd  love to see them as I am out
of ideas!

Thanks in advance,

Robert E. Burger
Information Systems  Coordinator
Tarrant County CSCD
Fort Worth, Texas,  USA
==================================
AS/400 Model 9406-620 running  OS/400 V4R2




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---