RE: FTP with as400 commands -- MIDRANGE-L

The output is on the 400. That was just an example of using the QUO.
This can be used call a CL to generate a report, CPYSPLF to a database file
and then do another QUO rcmd to pull that print file to your PC.
Jim Knight


> -----Original Message-----
> From: Bob Cozzi [SMTP:cozzi@rpgiv.com]
> Sent: Wednesday, June 30, 1999 3:22 PM
> To:   MIDRANGE-L@midrange.com
> Subject:      Re: FTP with as400 commands
> 
> Jim,
> 
> If you run the DSPMSG output(*PRINT), how do you get the output from within
> FTP? That is, how do you get the spool file from that command to be sent
> down to your PC?
> 
> As I stated in my previous note, I was signed on with a low-authority user
> ID, and have been able to use RCMD when I signed as with my regular profile.
> 
> Bob Cozzi
> www.rpgiv.com
> 
> 
> ----- Original Message -----
> From: Jim Knight <jknight@rei.com>
> To: <MIDRANGE-L@midrange.com>
> Sent: Wednesday, June 30, 1999 2:54 PM
> Subject: RE: FTP with as400 commands
> 
> 
> > Not quite.  I used "QUO rcmd dspmsg qsysopr output(*PRINT)" from a DOS ftp
> > command and it worked just fine.
> > Jim K
> >
> > > -----Original Message-----
> > > From: Bob Cozzi [SMTP:cozzi@rpgiv.com]
> > > Sent: Wednesday, June 30, 1999 10:31 AM
> > > To: MIDRANGE-L@midrange.com
> > > Subject: Re: FTP with as400 commands
> > >
> > > The RCMD FTP command only works if you're doing an AS/400 to AS/400 FTP.
> It
> > > doesn't work when you're on a PC client running FTP on an AS/400 server.
> > > Right?
> > >
> > > Bob Cozzi
> > > www.rpgiv.com
> > >
> > >
> > > ----- Original Message -----
> > > From: Patrick Townsend <townsend@patownsend.com>
> > > To: <MIDRANGE-L@midrange.com>
> > > Sent: Tuesday, June 29, 1999 11:03 PM
> > > Subject: Re: FTP with as400 commands
> > >
> > >
> > > > Karl,
> > > >
> > > > You can use the rcmd FTP subcommand to run the file build and report
> > > > print functions all in the same session:
> > > >
> > > >     open x.x.x.x   /* connect to the AS/400 */
> > > >     user username
> > > >     pass password
> > > >     quote rcmd crtpf qgpl/myfile rcdlen(132) /* create the file */
> > > >     quote rcmd call mylib/mypgm /* print a report and copy to file */
> > > >     get mylib/myfile c:\mydir\myfile.txt
> > > >     quit
> > > >
> > > > Of course, you could probably put all of the logic in one CL program
> and
> > > > just call it, then pick up the file with the get statement....
> > > >
> > > > Patrick
> > > >
> > > > Karl Lauritzen wrote:
> > > > >
> > > > > I thought I saw once you can run as400 commands via FTP?
> > > > >
> > > > > Here is what I am trying to accomplish. I need to build a PF on my
> as400
> > > ,
> > > > > print a report and then FTP this file to a users PC and copy a
> floppy to
> > > > > send with report.
> > > > >
> > > > > I can get the batch file to run my ftp via DOS batch file but I
> cannot
> > > see
> > > > > how to run my program.
> > > > >
> > > > > Yes I could have user run rpt/pgm on 400 then run my ftp but this
> just
> > > > > sounds much cooler and that way the user does not have to remember
> to
> > > run
> > > > > rpt.
> > > > >
> > > > > +---
> > > > > | This is the Midrange System Mailing List!
> > > > > | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
> > > > > | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
> > > > > | To unsubscribe from this list send email to
> > > MIDRANGE-L-UNSUB@midrange.com.
> > > > > | Questions should be directed to the list owner/operator:
> > > david@midrange.com
> > > > > +---
> > > >
> > > > --
> > > > IBM AS/400 communications, FTP automation, and network security
> > > > software and consulting services.
> > > >
> > > > http://www.patownsend.com
> > > > +---
> > > > | This is the Midrange System Mailing List!
> > > > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > > > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > > > | To unsubscribe from this list send email to> 
> > > MIDRANGE-L-UNSUB@midrange.com.
> > > > | Questions should be directed to the list owner/operator:
> > > david@midrange.com
> > > > +---
> > > >
> > >
> > > +---
> > > | This is the Midrange System Mailing List!
> > > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > > +---
> > +---
> > | This is the Midrange System Mailing List!
> > | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> > | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
> > | Questions should be directed to the list owner/operator:
> david@midrange.com
> > +---
> >
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---