Re: Win '98 and my 3116 printer won't handle it!

[Chuck Lewis <CLEWIS@xxxxxxxxxx>]

Al,

So this printer ISN'T on your LAN (you could get a T/R card for it when it first
came out) ? We I "used to work" I had it on our LAN AND on our AS/400... Worked
fine that way...

Chuck

"Al Barsa, Jr." wrote:

> At 04:22 PM 6/30/99 -0700, you wrote:
> >Al Barsa, Jr. wrote:
> > >
> > > At 09:54 AM 6/30/99 -0700, you wrote:
> > >
> > > Specifically, it is attached to the 400 via twin-ax, and to my PC
> > > parallel.  There are no new drivers for Win '98, and the CE's tell us that
> > > the only way to make it work is to physically turn it off/on after each
> > > re-boot of the PC.
> >
> >Since this is a older printer... have you ever had it working as
> >described,
> >and what has changed.. just W/98 ???? Will it work as a twinax attached
> >printer ??? Will it work as a PC printer if NOT attached to 400 ???
> In the past few days, we've tried every driver under the sun.
>
> Yes, I could get it to work through the AS/400, as the PC is also connected
> to our token ring, but the performance would not be as good.  By hooking it
> directly to the PC, I get good performance.  I also have use of it when the
> 400 is down (eg: SAVSYS, new release [I do more of these than most other
> people].)
>
> Al
>
> +--------------------------------------------------+
> | Please do not send private mail to this address. |
> | Private mail should go to barsa@ibm.net.         |
> +--------------------------------------------------+
>
> Al Barsa, Jr. - Account for Midrange-L
> Barsa Consulting, LLC.
> 400 > 390
>
> Phone:  914-251-1234
> Fax:            914-251-9406
> http://www.barsaconsulting.com
> http://www.taatool.com
>
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---