APPN Question

["Jeffrey Young" <jefyoung@xxxxxxxxxxxxxxxx>]

I have 3 AS/400 systems that are connected to each other.  System A, System
B, System C.
System A is connected to System B via a 14.4 dial link.  System B is
connected to System C via a LAN connection.

I can pass thru to System B from System A, and then from System B to System
C.

System A network attributes are:
Local Location Name = SYSTEMA
Local Control Point Name = SYSTEMA
Local Network Id = APPN


System B
Local Location Name = SYSTEMB
Local Control Point Name = SYSTEMB
Local Network Id = APPN

System C
Local Location Name = SYSTEMC
Local Control Point Name = SYSTEMC
Local Network Id = APPN


I can not change any of these network attributes.

I have tried APPN remote config lists, creating an explicit APPN device for
System C on System A, and a number of other methods with no luck.
What I would like to do is connect to system C directly from System A after
the dial connection to System B is established.

All suggestions are appreciated.


Jeff Young
Dynax Resources, Inc
Certified AS/400 Technical Specialist
Certified AS/400 RPG Programmer
Certified AS/400 Professional System Administrator
>

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---