• Subject: RE: Cisco 2500 to a 9406-170
  • From: "Art Tostaine, Jr." <Art@xxxxxxxxxxx>
  • Date: Fri, 24 Sep 1999 15:45:07 -0400
  • Importance: Normal

How about something as simple as station address set to C2 instead of C1?  
We're working on it.
Thanks!

Art Tostaine, Jr.
CCA, Inc.
Jackson, NJ 08527


-----Original Message-----
From: owner-midrange-l@midrange.com
[mailto:owner-midrange-l@midrange.com]On Behalf Of Larry Bolhuis
Sent: Friday, September 24, 1999 2:15 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Cisco 2500 to a 9406-170


  Yup you got it right now-IBM cable to Cisco Cable. Not even Black Box has a
cable with a Cisco high density connector on one end with an IBM PCI connector 
on
the other. Even less likely they'd get the pins right!!!

  The netwizards need to make some change to the Cisco no doubt. Likely they 
have
the clocking option wrong or some such. (I am assuming here that you have a
Line/Controller/Device in a 'Vary On Pending' status, the Line actually may be
'Varied On'.

 - Larry

"Art Tostaine, Jr." wrote:
>
> The supplied cable does fit on the AS/400, but does not fit on serial 1 of 
>the router.  The router
> as some special looking connector, with approx 50 pins and very small.
>
> Right now I have the cisco cable connected to the IBM cable.  The network 
>techs say they can see
the
> AS/400 change status, but we're not up.
>
> We might have some kind of configuration change to make.
>
> Art Tostaine, Jr.
> CCA, Inc.
> Jackson, NJ 08527
>
> -----Original Message-----
> From: owner-midrange-l@midrange.com
> [mailto:owner-midrange-l@midrange.com]On Behalf Of Larry Bolhuis
> Sent: Thursday, September 23, 1999 4:07 PM
> To: MIDRANGE-L@midrange.com
> Subject: Re: Cisco 2500 to a 9406-170
>
> You need the standard IBM V.24 cable. It should have come with your AS/400,
> although with the new systems you can order cards without cables.  That cable
> will have the V.24 connector you need.  It is extremely unlikely that any NON 
>IBM
> cable's will correctly work when directly attached to any AS/400 CISC or RISC.
>
>  - Larry
--
Larry Bolhuis         | What do You want to Reload today?
Arbor Solutions, Inc  |
(616) 451-2500        |
(616) 451-2571 -fax   | Two rules to success in life:
lbolhui@ibm.net       | 1. Never tell people everything you know.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.