Re: TCP/IP printing

[email@xxxxxxxxxxxxxxxxxxx (James W Kilgore)]

John,

I've not used a multiport jet box, but i recall this topic being brought
up in the past and the solution at that time was changing the port
number you directed  your outq to.

Don't quote me on this (check the archives) but it was something like
jet output #1 used the default port 9001 and you had to explicitly
assign output #2 to use port 9002.

Since the box has a single IP address, your outq would be assigned
xx.xx.xx.xx:9002

HTH

John Cirocco wrote:
> 
> I am trying to do direct printing using TCP/IP to our HP printers which
> are attached via Jet Direct boxes/cards.
> 
> Everything was going along just peachy when we came across a 2 port jet
> direct box.  Unfortunately you can assign a single address to it.  Now
> how would I configure the 2 AS/400 remote queues when I have only one
> address.  I gotta believe I am not the first to attempt this.
> 
> Thanks in advance for the help.
> 
> Regards,
> John
> 
> John W. Cirocco
> Director, Information Technology
> Pierce & Stevens Corp.
> 710 Ohio Street
> Buffalo, NY 14203
> John_Cirocco@PierceStevens.com
> Phone 716-856-4910 Ext. 201
> Pager 1-800-670-7039
>    or 6707039@pagemci.com
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---