Re: Two outqs on ONE printer...

[Chuck Lewis <clewis@xxxxxxxxxx>]

Terry,

You know I started looking at that one yesterday and noticed that. But once it
makes that switch, it stays on the other queue; correct ?

Thanks !

Chuck

Terry Richardson wrote:

> If you started the writer with STRPRTWTR DEV(PRT01) OUTQ(PRT01) WTR(*DEV),
> you can then issue the command CHGWTR WTR(PRT01) OUTQ(PRT02).  The default
> value for the option of when to make this change effective is *NORDYF, which
> will change the write to print from queue PRT02 when there are no more spool
> files at ready status in PRT01.  You could set this to *FILEEND to switch
> when the current file completes, even if there are others in the PRT01
> queue.
>
> Terry Richardson
> Sr. P/A
> The Orvis Company, Inc.
> 802-362-8663
>
>         -----Original Message-----
>         From:   Chuck Lewis [SMTP:clewis@iquest.net]
>         Sent:   Tuesday, 1999-December-14 11:18 AM
>         To:     MIDRANGE-L@midrange.com
>         Subject:        Re: Two outqs on ONE printer...
>
>         Hi John,
>
>         HOW ? :-) All that will let me do is move the writer that is
> printing on PRT01 to
>         PRT02 and then it's not on PRT01 anymore (?)...
>
>         This is driving me NUTS because I KNOW I did it earlier this year,
> we were on
>         V4R1 then and we are now, and I can't for the LIFE of me remember
> what I did but
>         it seemed like it was something SIMPLE !!! ARGHHHHH <BG>
>
>         Chuck
>
>         john wrote:
>
>         > If I an not mistaken (which is frequently the case) use CHGWTR to
> add the
>         > other queue.
>         >
>         > john
>         >
>         > > -----Original Message-----
>         > > From: Chuck Lewis [mailto:clewis@iquest.net]
>         > > Sent: Tuesday, December 14, 1999 4:08 AM
>         > > To: MIDRANGE-L@midrange.com
>         > > Subject: Two outqs on ONE printer...
>         > >
>         > >
>         > > Hi Folks,
>         > >
>         > > DUH here...
>         > >
>         > > I KNOW I have done this before and I SPACED how I did it. I
>         > > need to have
>         > > 2 print queues print on 1 printer.
>         > >
>         > > I thought you could to do a STRPRTWTR PRT01 PRT01and then a
> STRPRTWTR
>         > > PRT01 PRT02 but that yields a "PRT01 already started" and that
> makes
>         > > sense as a prompt the command that I am SO used to keying in
> without
>         > > prompting and it is STRPRTWTR DEV(PRT01) OUTQ(PRT02).
>         > >
>         > > So I did a STRPRTWTR DEV(PRT02) OUTQ(PRT02) WTR(PRT02) and it
>         > > starts and
>         > > a WRKWTR PRT02 shows the writer on PRT01...
>         > >
>         > > IS that correct ? Don't remember it being this cryptic...
>         > >
>         > > TIA !
>         > >
>         > > Chuck
>         > >
>         > > +---
>         > > | This is the Midrange System Mailing List!
>         > > | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
>         > > | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
>         > > | To unsubscribe from this list send email to
>         > > MIDRANGE-L-UNSUB@midrange.com.
>         > > | Questions should be directed to the list owner/operator:
>         > > david@midrange.com
>         > > +---
>         > >
>         >
>         > +---
>         > | This is the Midrange System Mailing List!
>         > | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
>         > | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
>         > | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
>         > | Questions should be directed to the list owner/operator:
> david@midrange.com
>         > +---
>
>         +---
>         | This is the Midrange System Mailing List!
>         | To submit a new message, send your mail to
> MIDRANGE-L@midrange.com.
>         | To subscribe to this list send email to
> MIDRANGE-L-SUB@midrange.com.
>         | To unsubscribe from this list send email to
> MIDRANGE-L-UNSUB@midrange.com.
>         | Questions should be directed to the list owner/operator:
> david@midrange.com
>         +---
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---