Re: Client Access Session does not start.

[Tom Hightower/Solutions_Inc<tomh@xxxxxxxxx>]

Dunno if it will help, but you might try this:
WRKCFGSTS *DEV dev_name
is there a job running attached to that device?  If so, end it
vary off the device, then vary it back on





Dave Mahadevan <mahadevan@fuse.net> on 01/04/2000 09:44:15 PM
To:     midrangel <MIDRANGE-L@midrange.com>
cc: 

Subject:        Client Access Session does not start.



Folks:

I have a problem with Client Access (SF59075 applied) in Win98 with
TCP/IP.  This was working just fine till yesterday.  The emulator 5250
session hangs with that dang 657 in the status bar.  The AS/400 on V3R2
with latest cum ptf never gets the request because I checked Netstat
option 3 for telnet in my pc's remote address.  I have checked the host
servers, QUSER password etc.  I can get shared folders, client access
data transfers etc but no emulator session.  The connection is ok and
verify connection returns no errors or warnings.   I have tried creating
a new session with no name and no go.  Job QTGTELNETS has no strange
messages.  Netstat does show me as-cent (port 8470) and as-file (port
8473).  I uninstalled SF59075 with no difference.  I ipled the AS400
with no  success. I ran a trace on the pc and the trace shows a socket
error.  Following is from trace log.

[7] 01/04 22:14:17.61,(0055) len=79, 5250 Emulator.Communication
data.0001, FFC67CEB:FFC6A057
             Server Host Name: AS400

[8] 01/04 22:14:21.47,(0056) len=18, 5250 Emulator.Communication
data.0001, FFC67CEB:FFC6A057
             SOCKET ERROR: sock_error()=11001

What the heck is it? How do I fix it?   This thing does not use WSOCK32
. right??  I am now very close to thinking of uninstalling the entire
product and reinstalling but if there is a better way to keep the little
hair I have left... Thanks for any ideas.

--
Thank You.

Regards

Dave Mahadevan.. mailto:mahadevan@fuse.net


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to 
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: 
david@midrange.com
+---




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---