Error pinging to the internet

["Gary Kuznitz " <docfxit@xxxxxxxxxxx>]

Hi,

After dialing the 400 and connecting to the internet I try to ping 
from the 400 to anyplace on the internet.  I get the following error:

Message ID . . . . . . : TCP3202                                  
  Message . . . . :   Unknown host, DYNDNS.ORG                         
 
The line is showing *error under Line Type in the
    Work with Point-to-Point TCP/IP 
                                                Line             Line          
Job
   Name   Mode  Type   Status   Description   Type         Name       
THEGRID  *DIAL  *PPP  OUTQ  THEGRID  *ERROR QTPPDIAL22 
 
In the Line Type - Help for   *ERROR it says

*ERROR   This value is displayed if the line description  cannot be 
found or is damaged. 

The line was varied on with the controller and the device with no 
problem showing.

In the modem log it says
 19:21:13.994 === NOTE: REJECTED LCP OPTION 11 
(lcp_rcvreqci)                                                                  
     
 19:21:13.995 === NOTE: REJECTED LCP OPTION 13 
(lcp_rcvreqci)                                                                  
     
 19:21:17.347 === NOTE: AS/400 LOCAL  IP ADDRESS 
209.162.23.190                                                                  
   
 19:21:17.366 === NOTE: REMOTE PEER'S IP ADDRESS 
209.162.23.1                                                                    
   
 19:42:02.222 === Status code X'54001490' from device 
THEGRTCP.                                                                     
19:42:02.831 === Status code X'54001490' from device 
THEGRTCP.                                                                     
 19:42:02.939 === NOTE: lcp_main: status evt 0x54001490 
0x00000000                                                                  
 19:42:06.473 === Message received for Point-to-Point Profile 
THEGRID, Reason Code 1.                                               

Does anyone know where to look up the above status codes and 
reason code?  Are these normal or are they identifying an error?

In the Job Log it says:
TCP8342    Message . TCP/IP point-to-point interface 
209.162.23.190 added.  Interface 209.162.23.190 was added 
successfully for TCP/IP

Does anyone have any idea what might be causing this?

Any input would certainly be appreciated.

TIA,

Gary Kuznitz
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---