Re: Dimms in a 170

["Gary Kuznitz " <docfxit@xxxxxxxxxxx>]

If you must try to save on memory would suggest:
1.      Turning your machine off.  (I know someone that didn't)
2.      Removing some memory you currently are running with.
3.      Taking it to Best Buy and having them test it.
They will test it for free and let you know exactly what it is and how 
fast it is.  Then you can compare the specs.

Good Luck,

Gary Kuznitz

PS:  I have no association with the company, nor have I tried this 
myself  ... just passing on the info.

On 11 Feb 00, at 10:50, Larry Bolhuis wrote:

> I haven't read my maintenance contract recently but I suspect
> installing non-IBM parts that you are not even sure if the voltages,
> speed and other parameters are compatible will execute the 
WARRANTY
> *VOID command and likely MAINTENANCE *CANCELED 
followed closely by
> BUDGET *BLOWN and worst case the RESUME *UPDATE 
command as well.  Or
> it might just work - Your choice.
> 
> Understand that I don't believe that the memory for these things
> should be priced where it is or take so long to get, but on the 
other
> hand it is guaranteed to work, is installed by IBM and I have never
> seen any fail.
> 
>  - Larry
> 
> DAVID BULOG wrote:
> > 
> > I just purchased Origional Digital labeled 128meg (4 x 32meg) 
ECC
> > 168 Pin 3.3v Buffered Dimms for a DEC Alpha Server.---Cost 
US$150
> > total. Id say that the Dims for the 170 would be the same type .
> > Dave
> > 
> 
> -- 
> Larry Bolhuis         |         What if it's True?
> Arbor Solutions, Inc  |
> (616) 451-2500        |  
> (616) 451-2571 -fax   | 
> lbolhui@ibm.net       |

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---