Re: Regarding system power...

[Tawbrey@xxxxxxxxxxxxxxx]

Tom,

I just went through this whole fiasco with IBM! Does the UPS happen to be
an Exide Powerware 3000? If so, take a look at what voltage the UPS is
sending to the AS/400. It is probably sending 230 and should be sending
208. It tells how to check and change this in the UPS manual. As soon as
ours was changed the problem went away. I have no idea why it ships with it
set to 230? Good luck.

Thanks,

Tony Awbrey
Technical Specialist

IBM Certified Specialist -- AS/400 Technical Solutions, Domino for AS/400

Ascend Technologies, Inc.
2658 Crosspark Rd. Suite 200
Coralville, IA 52241
Voice: 319.626.5490 ext. 825
Fax:     319.626.5491


                                                                                
              
                    tomh@simas.com                                              
              
                    Sent by:                   To:     MIDRANGE-L@midrange.com  
              
                    owner-midrange-l@mi        cc:                              
              
                    drange.com                 Subject:     Re: Regarding 
system power...     
                                                                                
              
                                                                                
              
                    04/27/2000 01:19 PM                                         
              
                    Please respond to                                           
              
                    MIDRANGE-L                                                  
              
                                                                                
              
                                                                                
              




Are you plugged into a UPS?

I installed a UPS at a client site.  I hooked up the comm cable from the
UPS to the 400, and kept getting that type of message until I plugged the
AS400 power cable into it.




                    stg_midrange_support@md.in.d

                    sqsoft.com                          To:
MIDRANGE-L@midrange.com
                    Sent by:                            cc:

                    owner-midrange-l@midrange.co        Subject:
Regarding system power...
                    m



                    04/27/00 10:07 AM

                    Please respond to MIDRANGE-L









Hello friends...
                We have V4r3 machine. We are getting the message "System
utility
power failed at 000427101433". Then it gives the message "System utility
power
restored at 000427101652". What is the error?.


Thanks
regards
K Senthil.


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---



+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to
MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---