RE: Occasional CPF6702 Media Errors on Magstar 3570 tapes -- MIDRANGE-L

Bryan , 

        Replace the drive and you'll be just cool that is if you have
checked the software code for the actual tape and install the latest package
of PTF's.


nearly 100% sure.

Cesar

-----Original Message-----
From: MacWheel99@aol.com [mailto:MacWheel99@aol.com]
Sent: Saturday, August 19, 2000 12:50 PM
To: MIDRANGE-L@midrange.com
Subject: Re: Occasional CPF6702 Media Errors on Magstar 3570 tapes


I have had a variety of media problems, which have dramatically subsided,
but 
I do not know which effort made the most difference:

On eve of heavy use, such as end of month, do a cleaning if none recently
... 
we write dates last done on our cleaning tape, so I can see at glance if
done 
a few days ago or not done in 2 weeks.
Use vendor reccommended media for tape drive, not el cheapo substitutes.
Naming convention for volumes that tracks back to vendor that supplied it so

if bad pattern by brand or vendor, we can do something about it.
Very carefully stand them on end so that the media hangs loose over the 
reels, instead of letting the tapes lay flat between useages.
I like to track when was the last time this tape was used for what purpose.

I use post it notes on cardboard wrap that came with tape, inside plasticc
 ase, not lots of sticky stuff replaced on tape itself.
When off-site goes home in rotation, make damn sure that it is stored & 
transported in accordance with temperature ranges reccommended for magneticm
 edia ... if middle of summer, not leave it in car very long & not in direct

sunlight for dang sure ... if middle of winter, not leave in car very longl
 ike overnight by accident
Periodically run that SST that gives media statistics & replace media that
is 
in trouble before it goes totally bad.
When must leave service, update some notes on date range survived, SST 
statistics, brand name etc. so I can see at a glance which brand names arel
 asting longer, and that impacts future resupply orders.
I try not to buy same brand size from two different vendors, so when we got
a 
problem I know who we got it from.

>  From:    burnsbm@echoincorporated.com (Bryan Burns)

>  Our MAPICS back ups, which we perform five days a week, fail every two or

>  three months, due to CPF6702 media errors.
>  
>  I have yet to see the cleaning indicator even be activated on this 
machine, 
>  but when the errors started occurring last fall, we started cleaning the>
   3570 every Monday.  We still get the errors.
>  
>  We have one tape for each day of the week so I would not think it is an>
   overuse problem.
>  
>  In the beginning of the year, an IBM CE came out and looked at the
machine 
>  and had us load a  PTF or two.  We still get the errors.
>  
>  I do take the back up tapes home with me each night in a little padded>
   envelope.  Could  the tapes be picking up contaminants through the 
handling 
>  of them?  Also, some MIS personnel used to put stock labels over the 
>  barcode labels. Some of the stock labels have since been removed, leaving

a 
>  pretty clean bar code label but with some residue.  Could a dirty label>
   cause a media error?
>  
>  After the most recent failure, I successfully initialized the tape in 
>  question.  I was told that if it can be initialized, then it is actually
a 
>  good tape.  Is this true?
>  
>  Is it normal to have this frequency of errors?  If not, does anyone int
 his 
>  great midrange-list community have a solution?
>  
>  Bryan Burns
>  System Operator
>  Echo, Inc.
>  Lake Zurich, IL
>  Burnsbm@echoincorporated.com

Al Macintyre  ���
MIS Manager Green Screen Programmer & Computer Janitor of BPCS 405 CD Rel-02

running on AS/400 V4R3 http://www.cen-elec.com Central Industries of 
Indiana--->Quality manufacturer of wire harnesses and electrical 
sub-assemblies
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator:
david@midrange.com
+---


DISCLAIMER

Any opinions expressed in this email are those of the
individual and not necessarily the Company. This email
and any files transmitted with it, including replies and
forwarded copies (which may contain alterations) 
subsequently transmitted from the Company, are 
confidential and solely for the use of the intended recipient
It may contain material protected by attorney-client
privilege. If you are not the intended recipient or the 
person responsible for delivering to the intended recipient, 
be advised that you have received this email in error and
 that any use is strictly prohibited.

If you have received this email in error please notify the IT
manager by telephone on +44 (0)208 4762000 or via 
email to Administrator@itm-group.co.uk, including a copy
of this message. Please then delete this email and 
destroy any copies of it.
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---