RE: Client Access Host Servers -- MIDRANGE-L

Title: RE: Client Access Host Servers

John
I didn't find any information about this exit point TRAN0100 in the manual.There is no information about original servers.Does Client Access Express supports this exit point in V4R4?

Rizwan Ahamed

-----Original Message-----
From:   John Earl [SMTP:johnearl@400security.com]
Sent:   Wednesday, August 30, 2000 12:55 AM
To:     MIDRANGE-L@midrange.com
Subject:        Re:

Rizwan,

No the VLRQ0100 and the TRAN0100 formats are not the same.� You can find the formats for TRAN0100 (and many others) in the Client Access Express Host Servers V4R4<I> (SC41-5740-03 QB3AUX03) manual.

hth,

jte
�
�
�

Rizwan Ahmed wrote:

�

Thanks Gary
I have exit programs for FTP and is working fine.My concern is about simple file transfer and the exit point is QIBM_QTF_QTRANSFER and the Exit point format is TRAN0100.I am searching hard for documents about the parameters list for this exit point format(TRAN0100) and also samples for this Exit Point.I wrote a small exit program but I am not sure it's working.

Can I use the same paramer list for which I use FTP Client/Server� Exit Programs ie VLRQ0100.Are both the same?.
Highly appreciating your help.
Rizwan Ahamed
Programmer-analyst / Software developer
rizwan@nscsa.com.sa

NSCSA.
Telephone :�� (966) 4785454-611
Fax :�� (966) 4778036
Site� internet / Website :�� www.nscsa.com.sa
E-mail :�� itdmail@nscsa.com.sa

-----Original Message-----
From:�� Gary R. Patterson [SMTP:midrange-l@nexsource.com]
Sent:�� Tuesday, August 29, 2000 8:18 AM
To:�� MIDRANGE-L@midrange.com
Subject:�� RE:

You can debug programs running in an FTP server job.� Remember to compile
your ILE program with DBGVIEW(*SOURCE).

1) Start an FTP session and supply a valid user ID and password.

C:\WINDOWS>ftp MY400
Connected to MY400.
220-QTCP at MY400.
220 Connection will close if idle more than 166 minutes.
User (MY400:(none)): MYPROFILE
331 Enter password.
Password: xxxxxxxxxx
230 MYPROFILE logged on.

2) In a terminal session, identify the server job that you are connected to
(it will hold a lock on the user profile used to log into the FTP server):

WRKOBJLCK MYPROFILE *USRPRF

Note: If you sign on to FTP using a profile that is widely used, you might
see a lot of jobs locking that profile.� An easy way to determine which one
is yours is to enter the DSPJOB command as an FTP remote command (in the FTP
client window):

ftp> quote rcmd dspjob

Check WRKSPLF for the FTP signon profile and find the job name in the
QPDSPJOB spooled file.

3) Start a service job over the job identified in step 2.

STRSRVJOB QTPFTPxxxx

4) Start debug.� Since you are servicing another job, debug commands apply
to the serviced job.

STRDBG MYLIB/MYPROGRAM UPDPROD(*YES) DSPMODSRC(*YES)

5) Set breakpoints, or step.

BREAK xx -OR- F10

6) Cause the program to be invoked (I am just doing an explicit FTP remote
command invocation.� You can execute any AS/400 command in FTP by executing
"QUOTE RCMD command".� If you are using an FTP exit program, just do a
download (or whatever) to kick off the exit program.

ftp> quote rcmd CALL MYLIB/MYPROGRAM

7) The source debug screen will pop if and when your program hits your
breakpoint(s).� Since you are servicing another job, it will be slower than
debugging in the same job.� You can use manual debugging if you prefer, but
it is slow, too.

(I'm on OS/400 V4R4, and I used the Win98 FTP client to connect to the
AS/400 FTP server.� Sample program was an ILE RPG program compiled with
DBGVIEW(*SOURCE).)

Gary R. Patterson
NexSource, Inc.

980 N Michigan Ave, Suite 1400
Chicago, IL 60611
(312) 214-3526

640 W. Main St.
Louisville, KY 40202
(502) 581-0106

Information technology services for business
http://www.nexsource.com
�

-----Original Message-----
From: owner-midrange-l@midrange.com
[ mailto:owner-midrange-l@midrange.com]On Behalf Of Pete Hall
Sent: Monday, August 28, 2000 8:59 PM
To: MIDRANGE-L@midrange.com
Subject: Re:

At 04:03 08/27/2000 , Rizwan Ahamed wrote:
>Any ways to debug an file transfer exit program(ie like downloading &
>uploading files from and to AS/400 eg thru Client Acess and not FTP).I
>found 5 jobs I remember in wrkactjob during file transfer and how to use
>StrSrvJob for that?.Any ways to debug apart from strsrvjob like submitting
>to job?.Would appreciate any help.

+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

--
John Earl�� johnearl@400security.com
The PowerTech Group�� 206-575-0711
PowerLock Network Security�� www.400security.com
--
�
+--- | This is the Midrange System Mailing List! | To submit a new message, send your mail to MIDRANGE-L@midrange.com. | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com. | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com. | Questions should be directed to the list owner/operator: david@midrange.com +---