IP over SNA connection (X.21)

[Philipp Rusch <Philipp.Rusch@xxxxxxxxxxxx>]

Hello all,
here is another request to all those, who managed it already ...
Setup is as follows:
SNA connection over X.21 line (ISDN) from one AS/400 to another,
works perfectly. We now wanted to add TCP/IP to that link, to be
able to route the PC traffic over the same (leased) line.
I defined (cfgips) an ip over sna interface on both ends, defined
the *ips routes, mapped SNA-names to ip-adresses, no chance at all
to get even a ping to work over that line !

         ---------                       ---------
 Eth.   | AS/400  |                     | AS/400  | Eth.
 LAN A  | "SYS_A" | X.21           X.21 | "SYS_B" | LAN B
 -------O         O------/....... /-----O         O-------
192.168 |         |     192.168..       |         | 192.168.1.250
142.7   |         | 145.7       145.250 |         |
         ---------                       ---------


With NETSTAT I see routes to each system on the other end, but
no telnet or ping gets through ... even when I try to ping only
the X.21-side of the same machine gets no response !
E.g. lets say I am on sys_a and ping to 192.168.145.7 which is listed
under netstat as directly connected interface - no answer !
(WRKIPSIFC says active to that line)

I can't get it to work ... am I on the wrong path ?

Any help appreciated, thanks in advance.

Regards from germany, Philipp Rusch

 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               Mailto: Philipp.Rusch@rusch-edv.de  |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,                                                |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---