RE: CAE NetServer access to V3R2 IFS? (was RE: Client Access"Sig non to AS/400" window) -- MIDRANGE-L

Multi issue:

1)  NetServer is independent of the version of Client Access installed on
your computer.  In fact you do not need Client Access to use drives on your
400 anymore.  You will need one PC with Client Access to configure Net
Server on your 400.  This PC will use Operations Navigator.  It can be done
via green screen by calling many API's - no commands.  However Op's Nav
beats the green screen configuration of NetServer hands down.

2)  Client Access V3R1M2.  At the very minimum, run V3R2M0.

3)  Will it work on V3R2 or V3R7?  Sooner or later bite the bullet!
>From the following link:
http://publib.boulder.ibm.com/html/as400/v5r1/ic2924/info/rzahl/rzahlrequirements.htm#HDRREQUIREMENTS
To function properly on iSeries and with network clients, AS/400 NetServer
requires the following:
- An iSeries system properly connected with Version 4 Release 2 (V4R2)
OS/400, or later, configured for a TCP/IP network.

Netserver performance, etc got much better as releases went by.


Rob Berendt

==================
A smart person learns from their mistakes,
but a wise person learns from OTHER peoples mistakes.



                    "Bale, Dan"
                    <Dan.Bale@handleman       To:     <midrange-l@midrange.com>
                    .com>                     cc:
                    Sent by:                  Fax to:
                    midrange-l-admin@mi       Subject:     RE: CAE NetServer 
access to V3R2 IFS? (was RE: Client
                    drange.com                 Access"Sig non to AS/400" window)


                    10/01/2001 02:58 PM
                    Please respond to
                    midrange-l






This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
But is NetServer a Client Access animal or an OS/400 animal?

In other words, I have CAE v4r4.  Will I get NetServer by virtue of
installing CAE v4r4?  Or is NetServer only available from OS/400 v4r2 &
higher?

It's beginning to sound as though I will lose all access to my V3R2 &
V3R7 systems' IFS objects through Windows Explorer if I replace CA
v3r1m2 with CAE v4r2.  Can someone confirm or deny?

TIA

Dan Bale
IT - AS/400
Handleman Company
248-362-4400  Ext. 4952
D.Bale@Handleman.com

> -----Original Message-----
> From:         DeLong, Eric [SMTP:EDeLong@Sallybeauty.com]
> Sent:         Monday, October 01, 2001 3:28 PM
> To:           'midrange-l@midrange.com'
> Subject:           RE: CAE NetServer access to V3R2 IFS? (was RE: Client
> Access"Sig non to AS/400" window)
>
> Dan,
>
> Netserver began its life at V4R2 and is not available on any release
> before
> that.
>
> Eric DeLong
> Sally Beauty Company
> MIS-Sr. Programmer/Analyst
> 940-898-7863 or ext. 1863
>
>
>
> -----Original Message-----
> From: Phil [mailto:sublime78ska@yahoo.com]
> Sent: Monday, October 01, 2001 2:01 PM
> To: midrange-l@midrange.com
> Subject: RE: CAE NetServer access to V3R2 IFS? (was RE: Client Access
> "Signon to AS/400" window)
>
>
> Dan,
>
> I can't answer all of your questions.  But I'll take a stab at the
> one's I
> have experience with.
>
> > Answers:
> > 1) I log into Novell (not NT)
> > 2) I am using a Windows NT 4 (SP6) client
> > 3) n/a (no NT signon, but FWIW, my Novell logon and AS/400 user ID
> are
> > not the same)
>
> I don't know about Novell.
>
> Since you're using NT workstation, the WinOS will prompt you for a
> userid/password if the windows userid/password is not also an as/400
> userid/password.  (In Win9*, the WinOS would only prompt for a
> password.
> This is why it's difficult to use NetServer when Win9* are on the
> desktops.)
> >
> > So, can I set up NetServer in this environment?  And will NetServer
> > allow me to access V3R2 & V3R7 IFS via mapped drives?
>
> I don't know about that.
> >
> > Remember the end target of this request is to be able to lose the
> > "Signon to AS/400" window each time I start a session on a given
> AS/400.
> > (Except for the first time I ever used it, I never had this on my
> old
> > Win95 desktop.)
>
> Do you mean the gui signon window or the 5250 screen?  If you mean
> you're
> getting the gui signon each time you start a 5250 session (other than
> the
> first one) I suspect there is a configuration change you can make in
> CAE.
>
> If you mean having to sign in to each 5250 screen, then this may be
> controlled both on the AS/400 and CAE.  I sign into multiple as/400's
> from
> my PC which has W2K.  Some require me to signon to CAE and again into
> the
> 5250 sessions while others only require that I signon to CAE, then it
> will
> sign me on automatically to the 5250 session (each time I "run the
> same" it
> logs me on).  In none of these environments do I get the gui signin
> window
> except when first signing into CAE.
>
> hth,
>
> Phil
>
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.