RE: Message -- MIDRANGE-L

This is a MIME message. If you are reading this text, you may want to 
consider changing to a mail reader or gateway that understands how to 
properly handle MIME multipart messages.
--
Kirk you are exactly right.

Here is the message from the documentation...

CPI0999
Storage directory threshold reached.


The storage directory is nearing capacity. This is a potentially serious system 
condition. The system repeats this message until it receives an IPL.


You must reduce the amount of storage that is used on the system. To reduce the 
amount of storage that is used, do the following:


Delete objects from the system that are not needed.


Save objects that are not needed online by specifying STG(*FREE) on the Save 
Object (SAVOBJ) command


>>> "Kirk Goins" <kirkg@pacinfosys.com> 02/04/02 03:47PM >>>
This indicates that the total number of objs that the system can put on disk is 
approaching the max number. example: (I don't know the real numbers) Lets say 
the system can have 100,000 objects on the system, you have say 95,000 or some 
other high number. When you hit 100,000 it's like running out of disk. Again I 
don't know the real numbers this is just a example. I would run a RCLSTG and 
see what you get.



-----Original Message-----
From: Chuck Lewis [ mailto:clewis@iquest.net]
Sent: Monday, February 04, 2002 12:31 PM
To: midrange-l@midrange.com
Subject: Re: Message


Dave,

Do a wrksyssts and see what % system ASP used is at.

Do you have a bunch of job logs you can get rid of ?

Did you just install some new software or something ?

Chuck



Dave Snyder wrote:

> Can someone explain this message, how critical is it, what causes it, and how 
>can I avoid it in the future?
> Thanks.
> Dave
>
> Message ID . . . . . . : CPI0999 Severity . . . . . . . : 80
> Message type . . . . . : Information
> Date sent . . . . . . : 02/04/02 Time sent . . . . . . : 14:43:49
>
> Message . . . . : Storage directory threshold reached.
> Cause . . . . . : The storage directory is nearing capacity. This is a
> potentially serious system condition. This message will be repeated until
> an IPL has been performed.
> Recovery . . . : The amount of storage used on the system must be reduced.
> To reduce the amount of storaged used, do the following:
> -- Delete objects from the system that are not needed.
> -- Save objects that are not needed online by specifying STG(*FREE) on the
> Save Object (SAVOBJ) command.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
> or email: MIDRANGE-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l .

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l .

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l .
--
[ Converted text/html to text/plain ]
Kirk you are exactly right.

Here is the message from the documentation...

CPI0999
Storage directory threshold reached.

The storage directory is nearing capacity. This is a potentially serious
system condition. The system repeats this message until it receives an IPL.

You must reduce the amount of storage that is used on the system. To reduce
the amount of storage that is used, do the following:

Delete objects from the system that are not needed.

Save objects that are not needed online by specifying STG(*FREE) on the Save
Object (SAVOBJ) command
>>> "Kirk Goins" <kirkg@pacinfosys.com> 02/04/02 03:47PM >>>
This indicates that the total number of objs that the system can put on disk
is approaching the max number. example: (I don't know the real numbers) Lets
say the system can have 100,000 objects on the system, you have say 95,000 or
some other high number. When you hit 100,000 it's like running out of disk.
Again I don't know the real numbers this is just a example. I would run a
RCLSTG and see what you get.
-----Original Message-----
From: Chuck Lewis [ mailto:clewis@iquest.net][1]
Sent: Monday, February 04, 2002 12:31 PM
To: midrange-l@midrange.com[2]
Subject: Re: Message
Dave,
Do a wrksyssts and see what % system ASP used is at.
Do you have a bunch of job logs you can get rid of ?
Did you just install some new software or something ?
Chuck
Dave Snyder wrote:
> Can someone explain this message, how critical is it, what causes it, and
how can I avoid it in the future?
> Thanks.
> Dave
>
> Message ID . . . . . . : CPI0999 Severity . . . . . . . : 80
> Message type . . . . . : Information
> Date sent . . . . . . : 02/04/02 Time sent . . . . . . : 14:43:49
>
> Message . . . . : Storage directory threshold reached.
> Cause . . . . . : The storage directory is nearing capacity. This is a
> potentially serious system condition. This message will be repeated until
> an IPL has been performed.
> Recovery . . . : The amount of storage used on the system must be reduced.
> To reduce the amount of storaged used, do the following:
> -- Delete objects from the system that are not needed.
> -- Save objects that are not needed online by specifying STG(*FREE) on the
> Save Object (SAVOBJ) command.
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
> To post a message email: MIDRANGE-L@midrange.com[3]
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l[4]
> or email: MIDRANGE-L-request@midrange.com[5]
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l[6] .
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com[7]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l[8]
or email: MIDRANGE-L-request@midrange.com[9]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l[10] .
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com[11]
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l[12]
or email: MIDRANGE-L-request@midrange.com[13]
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l[14] .

===References:===
  1. mailto:clewis@iquest.net]
  2. mailto:midrange-l@midrange.com
  3. mailto:MIDRANGE-L@midrange.com
  4. http://lists.midrange.com/cgi-bin/listinfo/midrange-l
  5. mailto:MIDRANGE-L-request@midrange.com
  6. http://archive.midrange.com/midrange-l
  7. mailto:MIDRANGE-L@midrange.com
  8. http://lists.midrange.com/cgi-bin/listinfo/midrange-l
  9. mailto:MIDRANGE-L-request@midrange.com
 10. http://archive.midrange.com/midrange-l
 11. mailto:MIDRANGE-L@midrange.com
 12. http://lists.midrange.com/cgi-bin/listinfo/midrange-l
 13. mailto:MIDRANGE-L-request@midrange.com
 14. http://archive.midrange.com/midrange-l