|
? B3E9 ? Not valid system configuration ? UDLUSER ? 84 ?
? ? detected during IPL ? 59X4819 ? 15 ?
? ? ? FI01119 ? 01 ?
UDLUSER ? System Operator/User ? System operation information
59X4819 ? Multiple function I/O ? Repair and Parts; removal ?
? ? processor card ? and installation procedures ?
??????????????????????????????????????????????????????????????????????????
????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????
? FI01119 ? FI01119 indicates that the planar board is the failing item.
?
? ?
?
? ? 1. Use the following to determine the IOP address:
?
? ? If the SRC format is 11-2 xxxx xxxx, the address of the
IOP card is the 4 rightmost characters ?
? ? in function 13-2 of the SRC.
?
? ? If the SRC format is 11 xxxx xxxx, the address of the IOP
card is the 4 leftmost characters in ?
? ? function 13 of the SRC.
?
? ? If the error is on the console, the address of the IOP
card is the 4 leftmost characters in the ?
? ? Address field.
?
? ? 2. Determine the failing item location as follows:
?
? ? If the address is 0010 or 0020, the failing item is in
the system unit. ?
? ? If the address is 0110 or 0120, the failing item is in
the expansion unit. ?
? ? 3. If the failing item is in the system unit, use the following
parts: ?
? ?
?
? ?
?
? ? Warning: Disconnecting or removing the type 2620 or type
2628 cryptographic I/O processor for any ?
? ? reason causes the loss of the master encryption key.
?
? ?
?
? ? Read "Cryptographic I/O Processor Warning" in topic 5.2
before disconnecting or removing the ?
? ? cryptographic I/O processor.
?
? ?
?
? ?
?
? ? For Models Bxx, Cxx, D10, and D20:
?
? ? - If the label for slot 3 has the symbol PICTURE 53,
use part 92X4143. ?
? ? - If the label for slot 3 has the symbol PICTURE 54,
use part 73F9138. ?
? ? For Models D25, Exx, and Fxx, use part 73F9166.
?
? ? 4. If the failing item is in the expansion unit, use the
following parts: ?
? ?
?
? ?
?
? ? Warning: Disconnecting or removing the type 2620 or type
2628 cryptographic I/O processor for any ?
? ? reason causes the loss of the master encryption key.
?
? ?
?
? ? Read "Cryptographic I/O Processor Warning" in topic 5.2
before disconnecting or removing the ?
? ? cryptographic I/O processor.
?
? ?
?
? ?
?
? ? For Models Exx and Fxx, use part 85F9885.
?
? ? If the IOP address is 0120, use part 73F9139.
?
? ? If the label for slot 3 has the symbol PICTURE 55, use
part 92X6551. ?
? ? If the label for slot 3 has the symbol PICTURE 56, use
part 73F9139. ?
-----Original Message-----
From: Philipp Rusch [mailto:Philipp.Rusch@rusch-edv.de]
Sent: Sunday, March 10, 2002 7:58 AM
To: Midrange List
Subject: still problems with old E10 ...
Hello all,
I reported some IPL problems with an E10 a while ago and was hoping
that I could solve it with the help of the list ...
I had a running system - slow, but working - all I did was to pull
my disks out and put the disks of a customer in it. Since then my
system refuses to work, even if I put my old disk cages back in.
OK - the 2507-MFIOP reported an error - I exchanged it with an
2615 (a newer one), this gives me an SRC 2615-B3E9.
Anybody has the manual for this SRC ?
I really need to access the data on that disks ....
Regards from germany, Philipp Rusch
-----------------------------------------------------------------
| EDV Beratung Rusch EDP Consulting Rusch |
| Philipp Rusch Mailto: Philipp.Rusch@rusch-edv.de |
| Am Errlich 9 WWW : http://www.rusch-edv.de/ |
| D-61191 Rosbach, |
| Germany |
| Phone: (+49) 6003 3972 Mobile : (+49) 172 89 86 230 |
| Fax : (+49) 6003 3795 |
| |
-----------------------------------------------------------------
_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2025 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.