FTP server initialization failure

[James Rich <james@xxxxxxxxxxx>]

I get the following when starting the FTP server:

Message . . . . :   Exception CPF3CDB occurred when trying to get
information
  for exit point QIBM_QTMF_SVR_LOGON with format name TCPL0200.
Cause . . . . . :   The QusRetrieveExitInformation API returned an
exception
  when attempting to obtain information for exit point
QIBM_QTMF_SVR_LOGON.
  Recovery  . . . :   Check the job log or the system operator log for
other
  messages. Correct any errors indicated.  Start the FTP program again.

>From module . . . . . . . . :   QTMFUTIL
>From procedure  . . . . . . :   qtmf_IssueMessage__FPcT1ie
Statement . . . . . . . . . :   6186
To module . . . . . . . . . :   QTMFSRVR
To procedure  . . . . . . . :   _CXX_PEP
Statement . . . . . . . . . :   2695
Message . . . . :   FTP server initialization failure.
Cause . . . . . :   The FTP server program could not start, or could not
be
  initialized for an incoming connection request. Recovery  . . . :
Check
  the job log of the failing FTP server job to see if there is any
additional
  error information.  Correct any errors indicated in the job log.  Start
the
  FTP server job again with the STRTCPSVR command. Technical description .
. .
  . . . . . :   This message is issued if the FTP server program is unable
to
  obtain storage required for operation, or if an internal program error
  prevents the FTP server from starting successfully.

Unfortunately the job log of the failing FTP server says to check the job
log, so I seem to be going in circles here.  Anyone know what is wrong?

James Rich