V5R1 and V5R2 Annoying Problem

["Al Barsa" <barsa@xxxxxxxxxxxxxxxxxxx>]

Here is a V5R1 and V5R2 problem that the system will fix in a future
release.

When the system is IPLed, or comes out of restricted state, it is possible
to log the message CPF9E1F in QSYSOPR. The message indicates a license
management problem with product 5722XW1,  license term V5R1M0, feature
5101, even though all of the licensing is valid for the product.

Until that time, you can get extra messages in QSYSOPR, or execute the
following commands:

RMVPJE SBSD(QCMN) PGM(QZSCSRVR)
RMVPJE SBSD(QBASE) PGM(QZSCSRVR)

If message CPD1434 is received when running one of the above commands, the
prestart job is currently active, and an ENDPJ command must be used to
first end the active prestart job.

IBM does not intend to fix this problem in these releases, as the above
workaround exists.

Al

Al Barsa, Jr.
Barsa Consulting Group, LLC

400>390

914-251-1234
914-251-9406 fax

http://www.barsaconsulting.com
http://www.taatool.com



----- Forwarded by Al Barsa/Barsa Consulting on 11/21/2002 05:30 PM -----

                      Bradley A Smoley
                      <smoley@us.ibm.co        To:       
barsa@barsaconsulting.com
                      m>                       cc:
                                               Subject:  Requested Document
                      11/21/2002 05:20
                      PM








*******************************************************************************************************************************



Visit IBM online at:


       http://www.ibm.com/eserver/iseries/support    iSeries and AS/400
Technical Support Information


*******************************************************************************************************************************





|-------------------------------------------------------------------------------|

|
|
| APAR#:           SE02013
|
|
|
|
|
|
|
| Component:       5722SS100 - OS/400 BASE
|
|
|
|
|
|
|
| Release(s)       R510
|
|
|
|-------------------------------------------------------------------------------|




Abstract
OSP GETTING MSGCPF9E1F WHEN SYSTEM IPLS OR COMES OUT OF
RESTRICTED STATE.


Error Description
******* (Do NOT alter/erase this or next 3 lines) *******
* EQUIVALENT ABSTRACT:
OSP GETTING MSGCPF9E1F WHEN SYSTEM IPLS OR COMES OUT OF
RESTRICTED STATE_
When the system is IPLed, or comes out of restricted state, it
is possible to log MSGCPF9E1F RC1 in QSYSOPR. The message
indicates a license management problem with product 5722XW1,
license term V5R1M0, feature 5101, even though all of the
licensing is valid for the product.


Problem Summary
When the system is IPLed, or comes out of restricted state, it
is possible to log MSGCPF9E1F RC1 in QSYSOPR. The message
indicates a license management problem with product 5722XW1,
license term V5R1M0, feature 5101, even though all of the
licensing is valid for the product.

** If this problem continues to occur on OS/400 releases after
V5R1, remove the prestart job entry for QZSCSRVR from either
the QCMN or QBASE subsystem description.  QZSCSRVR is an APPC
prestart job that is not supported on releases after V5R1.  The
commands to remove the prestart job entries are as follows:

RMVPJE SBSD(QCMN) PGM(QZSCSRVR)
RMVPJE SBSD(QBASE) PGM(QZSCSRVR)

If message CPD1434 is received when running one of the above
commands, the prestart job is currently active, and an ENDPJ
command must be used to first end the active prestart job.

Problem Conclusion


Temporary Fix


Comments
The Central Server will be changed to request a license using
the correct format, this will eliminate the MSGCPF9E1F in the
QSYSOPR message log.







Circumvention
None. This is an informational message that should be ignored
for the current release. No loss of functionality occurs.

PTFs Available


Affected Modules


Affected Publications



Summary Information
Status................. CLOSED  UR1
Severity............... 3
HIPER.................. No
PIN.................... Yes
Reported Component..... 5722SS100
Fixed Component........ 5722SS100
Failing Module.........
Reported Release....... R510
Reported Release PTF...
Latest Release PTF.....
FESN................... 0907764
Duplicate Of...........

      IBM disclaims all warranties, whether express or implied, including,
 but  not limited to, the implied warranties of merchantability and fitness
   for a particular purpose.  By furnishing this document, IBM grants no
 licenses to any  related patents or copyrights.  Copyright (c) 1994, 1995,
  1996,1997,1998, 1999, 2000, 2001, 2002 IBM Corporation.  Any trademarks
 and product or brand names referenced in this document are the property of
    their respective owners.  Consult your product manuals for complete
                           trademark information.