Re: Device *N on resource *N failed

[Bonnie_Lokenvitz@xxxxxxxxxxxxxx]

Full message is:

Message ID . . . . . . :   CPI8030       Severity . . . . . . . :   70

Message type . . . . . :   Information

Date sent  . . . . . . :   10/15/03      Time sent  . . . . . . :
01:32:44


Message . . . . :   *Attention*  Device *N on resource *N failed.

Cause . . . . . :   The following may have caused the problem:

    -- Resource *N detected a data or command error from device *N

    -- Device *N detected a data or command error from resource *N

    -- Resource *N detected a device *N power lost

Recovery  . . . :   Power off and power on the device. If the device does
not
  become operational or this error continues, report the problem to your

  hardware service provider.

    Press F14 and report the problem.

Technical description . . . . . . . . :



    - Problem Log ID ........: 0328805304

    - Processor Resource ....: CMB01
    - Adapter Resource ......: CTL01

On this controller we have only the workstation that acts as the console
and
a Zebra printer configured as a 5225.  There are no joblogs for the printer
nor the workstation.

Thanks,
Bonnie