RE: Tape from archived

[Lurton Keel <LKeel@xxxxxxxxxxxxxx>]

This is what we get when we do a DSPTAP on our 6386 tape drive.
 

 Message ID . . . . . . :   CPF6772

 Date sent  . . . . . . :   10/22/03      Time sent  . . . . . . :
07:39:19 
 

 Message . . . . :   Volume on device TAP01 cannot be processed.

 

 Cause . . . . . :   One of the following occurred:

     -- The volume loaded on device TAP01 cannot be processed, because the

   format or density is not correct.

     -- The tape may be a new or blank tape that has not been initialized.

     -- The tape may not have an IBM-standard labeled sequence if the volume
i
   a 1/4 inch cartridge tape or an 8 millimeter cartridge tape, and the

   cartridge was created on a system other than an AS/400 system.

     -- The tape may contain data which was compacted and device TAP01 can
not
   read compacted data if the device is a 1/2 inch cartridge tape unit.

     -- The operator loaded a different volume during file processing.

     -- The tape unit needs cleaning

 -----Original Message-----
From:   pnelson@xxxxxxxxxx [mailto:pnelson@xxxxxxxxxx] 
Sent:   Tuesday, October 21, 2003 11:47 AM
To:     Midrange Systems Technical Discussion
Subject:        Re: Tape from archived

Can you do a dsptap?