Virtual Ethernet not connecting

[John Techmeier <JTechmeier@xxxxxxxxxxxx>]

I have an 825 with 7 LPARS which I want to set up multiple virtual ethernet
connections for. I'll give just one example here.

P0 has VLAN port 0 activated
P3 has VLAN ports 0 & 6 activated
P6 has VLAN ports 0 & 6 activated

P0 has...
      ETHLINE01 with an IP of 10.100.110.10 and subnet of 255.255.0.0
      VETH00 (port 0) with an IP of 10.98.110.01 and subnet of
255.255.255.0
      Host Table...
            10.98.110.30      P3
            10.98.110.60      P6
P3 has...
      ETHLINE01 with IP of 10.100.110.13 and subnet of 255.255.0.0
      VETH30 (port 0) with an IP of 10.98.110.30 and subnet of
255.255.255.0
      VETH36 (port 6) with an IP of 10.98.110.36 and subnet of
255.255.255.0
      Host table...
            10.98.110.1 P0
            10.98.110.66      P6
P6 has...
      ETHLINE01 with IP of 10.100.110.16 and subnet of 255.255.0.0
      VETH60 (port 0) with an IP of 10.98.110.60 and subnet of
255.255.255.0
      VETH66 (port 6) with an IP of 10.98.110.66 and subnet of
255.255.255.0
      Host table...
            10.98.110.1 P0
            10.98.110.36      P3

All interfaces have been started in their respective partitions.

>From P0, all pings come back successful.

>From P3     ping to P0 is successful.
            ping to P6 fails...
                  Verifying connection to host system P6 at address
10.98.110.66.
                  No response from host within 1 seconds for connection
verification 1.
                  ...
                  Connection verification statistics: 0 of 5 successful (0
%).

>From P6     ping to P0 is successful.
            ping to P3 fails...
                  Verifying connection to host system P3 at address
10.98.110.36.
                  No response from host within 1 seconds for connection
verification 1.
                  ...
                  Connection verification statistics: 0 of 5 successful (0
%).

Any help would be appreciated.

Thank you,

John Techmeier
Oshkosh Truck Corporation
jtechmeier@xxxxxxxxxxxx


Although this e-mail and any attachments are believed to be free of any virus 
or other defect which might affect any computer system, it is the 
responsibility of the recipient to check that it is virus-free and the sender 
accepts no responsibility or liability for any loss, injury, damage, cost or 
expense arising in any way from receipt or use thereof by the recipient.

The information contained in this electronic mail message is confidential 
information and intended only for the use of the individual or entity named 
above, and may be privileged.  If the reader of this message is not the 
intended recipient, you are hereby notified that any dissemination, 
distribution or copying of this communication is strictly prohibited.  If you 
have received this transmission in error, please  contact the sender 
immediately, delete this material from your computer and destroy all related 
paper media.  Please note that the documents transmitted are not intended to be 
binding until a hard copy has been manually signed by all parties.
Thank you.