|
A number of years ago I worked for a company that had problems starting TCP/IP on a model 520 during the IPL. If they had the STRTCP command in the start up program TCP/IP would fail and they had to start it manually. The solution they used was to have the start up program submit a CL program to batch that did a DLYJOB for 60 seconds and then the STRTCP. You may be having a similar problem. Hope it helps Jonathan -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Jan.Rockstedt@xxxxxxxxxxxx Sent: 15 December 2004 12:47 To: midrange-l@xxxxxxxxxxxx Subject: gateway unreachable Hi all! I have a new i520 and a old 170 in the same lan (subnet 255.255.255.248) My new has ip number 192.14.43.139 255.255.255.248 V5R3M0 My old has ip number 192.14.43.138 255.255.255.248 V5R2M0 Both has *DFTROUTE *NONE 192.14.43.137 *NONE (a cisco router). If i IPL my new i520, the i get on my old 170, gateway unreachable. See below. After 5 second i get gateway now reachable. See below Any sugestion for my problem? Msg . . : TCP/IP gateway 192.14.43.137 unreachable. Cause . . . . . : TCP/IP gateway 192.14.43.137 is no longer reachable from this system. Connections routed through gateway 192.14.43.137 may fail if no other route to the connection destinations can be found. Recovery . . . : If the problem persists then contact your network administrator. If gateway 192.14.43.137 becomes available again another message will be posted to indicate the gateway is now reachable. Msg . . : TCP/IP gateway 192.14.43.137 now reachable. Cause . . . . . : TCP/IP gateway 192.14.43.137 is now reachable from this system. It was previously indicated that this gateway was unreachable, but the gateway has now become available again. Recovery . . . : Informational message. Regards Jan Rockstedt HSB Syd IT Jan Rockstedt Spangatan 37B, 2:a van. 211 53 Malmo Sweden Phone: +46 (0)40 668 07 45 Fax: +46 (0)40 668 07 55 e-mail: jan.rockstedt@xxxxxxxxxxxx www.sydit.hsb.se -- This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/midrange-l or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.