RE: Is the drive already mapped?

["Holder, Ken" <kkh@xxxxxxxxxxxxx>]

Suggestion...

Map the drive with your STRPCCMD PC command.  Then using the QNTC file
system, do a Make Dir (MD) on the target NT server via CL to check to see if
your getting to the server or not. Create a test directory on the other
server so you can test for CPFA0A0.  Monitor for  CPFA0A0 "Object already
exists" message.  If you get that message then your PGM should continue on.
If you get any another CPF message then go to your error routine.

Hope this helps.

Ken H.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of
as400tech@xxxxxxxxxxx
Sent: Tuesday, August 23, 2005 11:45 AM
To: midrange-l@xxxxxxxxxxxx
Subject: Re:Is the drive already mapped?



Marty,
Thanks for the reply. Here is the command I am using. 

STRPCCMD   PCCMD('net use M: \\xxx.xxx.xxx.xxx\folder') +   
             PAUSE(*NO)                               

However, I don't see any way to capture what, if anything, is being sent
back to the iSeries. 



 
> message: 6
> date: Tue, 23 Aug 2005 14:07:51 -0400
> from: "Urbanek, Marty" <Marty_Urbanek@xxxxxxxxxxxx>
> subject: RE:  Is the drive already mapped?
> 
> Terry,
> 
> I am not familiar with the details of STRPCCMD, but if STRPCCMD returns
> the command output to the iSeries, you should be able to issue a NET USE
> command and the interrogate the output to determine if the drive is
> mapped.
> 
> -Marty
>