RE: SNDNETSPLF not working

["Ingvaldson, Scott" <SIngvaldson@xxxxxxxxxxxx>]

Sounds like a Directory Entry problem to me.

Do you have entries for:

User ID   Address 
SENDUSER  Sending System Name (Call it SYSTEMA)
*ANY      Receiving System Name (Call it SYSTEMB)

On the sending system

And:

User ID   Address 
RCVUSER   Receiving System Name (SYSTEMB)
*ANY      Sending System Name (SYSTEMA)

On the receiving system.


In the SYSTEMA distribution log you should see six entries:

Function  Entry  ------Logged------               ----Originator----
Seq  
  Type    Type   Date      Time      Job Name     User ID   Address
Nbr  
  *ORG    *NRM    1/30/06  11:50:43  Your Job     SENDUSER  SYSTEMA
0664 
  *RTR    *NRM    1/30/06  11:50:43  QMSF         SENDUSER  SYSTEMA
0664 
  *SND    *NRM    1/30/06  11:50:43  SYSTEMB      SENDUSER  SYSTEMA
0664 
  *RCV    *NRM    1/30/06  11:50:44  SYSTEMB      RCVUSER   SYSTEMB
0004 
  *RTR    *NRM    1/30/06  11:50:44  QMSF         RCVUSER   SYSTEMB
0004 
  *ARV    *NRM    1/30/06  11:50:44  QNFTP        RCVUSER   SYSTEMB
0004 

In the SYSTEMB distribution log you should also see six entries:

Function  Entry  ------Logged------               ----Originator----
Seq  
  Type    Type   Date      Time      Job Name     User ID   Address
Nbr  
  *RCV    *NRM    1/30/06  11:50:49  SYSTEMA      SENDUSER  SYSTEMA
0664 
  *RTR    *NRM    1/30/06  11:50:49  QMSF         SENDUSER  SYSTEMA
0664 
  *ORG    *NRM    1/30/06  11:50:50  QNFTP        RCVUSER   SYSTEMB
0004 
  *ARV    *NRM    1/30/06  11:50:50  QNFTP        SENDUSER  SYSTEMA
0664 
  *RTR    *NRM    1/30/06  11:50:50  QMSF         RCVUSER   SYSTEMB
0004 
  *SND    *NRM    1/30/06  11:50:50  SYSTEMA      RCVUSER   SYSTEMB
0004 

Hope this helps.

Regards,
 
Scott Ingvaldson
iSeries System Administrator
GuideOne Insurance Group


-----Original Message-----
date: Mon, 30 Jan 2006 16:49:42 +0100
from: "Knezevic, Mihael" <m.knezevic@xxxxxxxx>
subject: RE: SNDNETSPLF not working

i held the sending queue on the sending system an there was the entry
for the spooled file. then i released the queue and the log said that it
has send the file. i got three entries in the log (dspdstlog):

*RTR    *NRM   30.01.06  16:14:20
*ORG    *NRM   30.01.06  16:14:20
*SND    *NRM   30.01.06  16:14:22

on the receiving system i got just one entry

*RCV    *NRM   30.01.06  16:42:21

and no apparent errors on both systems.

i'm wondering where all those files are, cause there are nowhere to be
seen.

> -----Original Message-----
> From: midrange-l-bounces@xxxxxxxxxxxx 
> [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Chris Bipes
> Sent: Monday, January 30, 2006 4:32 PM
> To: Midrange Systems Technical Discussion
> Subject: RE: SNDNETSPLF not working
> 
> WRKDSTQ  on the sending system.  See if the queue for the remote 
> system is held or in an error state.  If the queue is empty on the 
> sending system, they have reached the remote system but held in a 
> receive queue there.  For files WRKNETF but I do not know how to see 
> the spool file queue on the receiving side.
> 
> 
> Christopher Bipes
> Information Services Director
> CrossCheck, Inc.
> 
> 707.586.0551, ext. 1102
> 707.585.5700 FAX
> 
> Chris.Bipes@xxxxxxxxxxxxxxx
> www.Cross-Check.com


DISCLAIMER:
This message and accompanying documents are covered by the Electronic 
Communications Privacy Act, 18 U.S.C. ?? 2510-2521, and contains information 
intended for the specified individual(s) only. This information is 
confidential. If you are not the intended recipient or an agent responsible for 
delivering it to the intended recipient, you are hereby notified that you have 
received this document in error and that any review, dissemination, copying, or 
the taking of any action based on the contents of this information is strictly 
prohibited. If you have received this communication in error, please notify us 
immediately by e-mail, and delete the original message.