Re: What could be affected by changing System Name versus Control Pt Name?

If you are not using SNADS, and Iseries Access is using TCP/IP, then the sytem 
name is not used by this connection.

If you want to change the network name for TCP you would do that in your DNS 
server.  TCP connections may also want CFGTCP option 12, Host Name to changes.  
I'm not sure where this name comes into play.

These parameters were matched for SNADS communications in the past, but you 
could get around them matching with WRKCFGL by creating a local location list.  
Any name that was added to this list would then be an alias for the system in 
SNADS.

Hope this helps

Wayne Johnston
Integrity Technology, LLC

NO!!!   DON'T DO IT!!!!!

We used to have 2 systems with LCP  *NE  System-Name.   Although we 
did figure everything out and everything worked well, there were 
minor issues from time to time.  We were using SNADS, and, although 
the instructions for everything hint that they do not have to match, 
almost everyone does keep them the same, and IBM service "assumes" 
that they match.  You could hear the *pause* every time we told them 
they were different...

We finally converted everything to match when we migrated to our 
latest machines.  A couple of issues with applications that talk to 
the other machine; I think iSeries Access needed to be updated to use 
the new name, but we changed the LCP name, not the system name.

Our main issue now is that one of our system names contains a # sign; 
although IBM allows $#@ as valid characters, most everyone else does 
not.  So we have TCP names that don't include the #.

--Paul E Musselman
PaulMmn@xxxxxxxxxxxxxxxxxxxx

Clare--  I've attached a chart I use to match up variables from one 
system to another, including the NETA, Configuration List, TCP/IP, 
and APPC/SNADS variables.  I hope it gives you some assistance.


>Does anyone know what is affected if I change the System Name on CHGNETA but
>leave the Local Control point name as is? Am I right in thinking that
>iSeries Access looks at the LCP Name and not the System name?? Is there
>anything apart from BRMS that might look at the System Name? (Snads is not
>being used). Also, I know that it is recommended that the System Name and
>LCP name should be the same, but does anyone know why?? I have trawled
>through the previous correspondence/IBM stuff on this, and am still not
>sure!
>I would like to change the system names of the boxes that are still called
>S+serialno to make things easier for international e-mail, but I don't want
>to break anything on those systems.
>
>thanks,
>
>Clare