RE: TCP/IP Stating...

["Rhett Hermer" <rhetth@xxxxxxxxxxxxxxxx>]

Via command line: STRTCP. (with defaults, *YES to parms) 

I see:

                                                    
      Internet         Subnet           Interface   
 Opt  Address          Mask             Status      
                                                    
      127.0.0.1        255.0.0.0        Active      
      192.168.2.9      255.255.255.0    Starting      

-----Original Message-----
From: midrange-l-bounces+rhetth=info-logic.co.za@xxxxxxxxxxxx
[mailto:midrange-l-bounces+rhetth=info-logic.co.za@xxxxxxxxxxxx] On Behalf
Of Luke Dalton
Sent: 28 March 2006 09:48
To: 'Midrange Systems Technical Discussion'
Subject: RE: TCP/IP Stating...


You're trying to start it, how?  iSeries Navigator or from a command line?  
Please provide more details about what you are doing and what you are seeing
where.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rhett Hermer
Sent: Tuesday, March 28, 2006 1:42 AM
To: 'Midrange Systems Technical Discussion'
Subject: TCP/IP Stating...

The as400's TCP/IP is stuck with message "Starting...".

I am stumped. I've checked the swtich, cable, and whatnot. 

Where should I investigate? 

Thanks,