RE: TCP/IP tuning

["Kevin Parrett" <kevinp@xxxxxxxxxxxxxxxxx>]

Sounds Like the program you listed did not run. Is your system value
wrksysval QSTRUPPGM. The program should be compiled into the library shown
here. There should also be a message or 2 in the qsysopr msgq that may point
you to a resolution.
Kevin  

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Thursday, June 08, 2006 6:19 AM
To: Midrange Systems Technical Discussion
Subject: RE: TCP/IP tuning

I see that the LINE description still shows online at IPL *NO, so the
CHGLINETH command did not run ?? 

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Thursday, June 08, 2006 6:12 AM
To: Midrange Systems Technical Discussion
Subject: RE: TCP/IP tuning

The IPL went last night, but I am still showing only HALF Duplex?

Below is the modified CL which shows that it has been USED one time.  I
checked the logs, but nothing seems to indicate that there was an error
in any of the commands.

/********************************************************************/  
     PGM                                                                
     MONMSG MSGID(CPF0000)                                              
/********************************************************************** 
     CHGLINETH  LIND(ETHLIN01) ONLINE(*YES) DUPLEX(*FULL)               
     MONMSG MSGID(CPF0000)                                              
     VRYCFG CFGOBJ(ETHLIN01) CFGTYPE(*LIN) STATUS(*ON)                  
                                                  
/********************************************************************** 
                                                           
     STRSBS QSERVER                                                     
     STRSBS SBSD(QSYS/QCTL)                                             
     STRSBS SBSD(AMESYS/QSPL)                                           
     STRSBS SBSD(AMESYS/QSNADS)                                         
     STRCLNUP                                                           
     STRPRTWTR DEV(*ALL)                                                
     STRSBS SBSD(AMESYS/QBATCH)                                         
     STRSBS SBSD(AMESYS/QCMN)                                           
     STRSBS SBSD(AMESYS/QINTER)                                         
     STRSBS SBSD(QPGMR)                                                 
                           
     DLYJOB     DLY(120)                                                
     STRTCP                                                             
                                                  
                                                            
     DLYJOB     DLY(120)                                                
     STRHOSTSVR *ALL                                                    
                                                 
                                                                        
     ENDPGM


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Sean Porterfield
Sent: Thursday, June 01, 2006 8:48 PM
To: Midrange Systems Technical Discussion
Subject: Re: TCP/IP tuning

Also, your MONMSG commands should be after each of the commands you run
instead of before.  Since you already have a MONMSG CPF0000 at the
beginning, it will apply to the whole program making your others
redundant.

--
Sean Porterfield

Chris Bipes wrote:
> Move it to the beginning.  TCP will not start completely with out the 
> line up and running.  I would put it between 2900 and 3000
>
>
> Christopher Bipes
> Information Services Director
> CrossCheck, Inc.
>
>
> -----Original Message-----
> From: Don Cavaiani
> Sent: Thursday, June 01, 2006 10:04 AM

> I added lines 4900 through 5200 ...  
>
> 2600-
> /********************************************************************
> 2700-      PGM
>
> 2800-      MONMSG MSGID(CPF0000)
>
>    2900- /* A458A */
>
>    3000-      STRSBS QSERVER
>
>    3100-      STRSBS SBSD(QSYS/QCTL)
>
>    3200-      STRSBS SBSD(AMESYS/QSPL)
>
>    3300-      STRSBS SBSD(AMESYS/QSNADS)
>
>    3400-      STRCLNUP
>
>    3500-      STRPRTWTR DEV(*ALL)
>
>    3600-      STRSBS SBSD(AMESYS/QBATCH)
>
>    3700-      STRSBS SBSD(AMESYS/QCMN)
>
>    3800-      STRSBS SBSD(AMESYS/QINTER)
>
>    3900-      STRSBS SBSD(QPGMR)
>
>                             
>    4500- /* A458A */
>
>    4600-      DLYJOB     DLY(120)
>
>    4700-      STRTCP
>
>    4800-      MONMSG MSGID(CPF0000)
> ______________________________________________________________________
>
>    4900-      MONMSG CPF0000
>
>    5000-      CHGLINETH  LIND(ETHLIN01) ONLINE(*YES) DUPLEX(*FULL)
>
>    5100-      MONMSG CPF0000
>
>    5200-      VRYCFG CFGOBJ(ETHLIN01) CFGTYPE(*LIN) STATUS(*ON)
> ______________________________________________________________________
>
>    5300- /* A458A */
>
>    5400-      DLYJOB     DLY(120)
>
>    5500-      STRHOSTSVR *ALL
>
>    5600-      MONMSG MSGID(CPF0000)
>
>    5700-
>
>                                      
>    6000-      ENDPGM
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.