RE: Remote upgrade of iSeries

["Haase, Justin C." <justin.haase@xxxxxxxxxxxx>]

I would recommend opening a session on the HMC of the system on the
local network and using a shared session from the remote location.  This
way, if you lose remote network connectivity you won't lose console -
just link back up to the shared session. 


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Wednesday, September 13, 2006 8:41 AM
To: Midrange Systems Technical Discussion
Subject: Re: Remote upgrade of iSeries

I have used "virtual media" to do upgrades.  I also have had wonderful
experiences using the remote access to HMC to upgrade boxes.  However,
never have I done it without someone in close proximity.  I suppose I
could, but in your case you'd better have a "what if" plan.

Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





BillSwann@xxxxxxxxxxxxx 
Sent by: midrange-l-bounces@xxxxxxxxxxxx
09/13/2006 09:09 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
midrange-l@xxxxxxxxxxxx
cc

Subject
Remote upgrade of iSeries






Hello everyone,

Has anyone been involved in version/release upgrade from a central site
to
a remote site.  The company I work for is contemplating doing this for 
some
of our customers.



Sincerely,


Bill Swann





  "Politeness and consideration for others is like investing pennies and
                  getting dollars back." -- Thomas Sowell