RE: System i5 first boot

["Haase, Justin C." <justin.haase@xxxxxxxxxxxx>]

I believe he's thinking of the FSP address, which is function 33 or 31
IIRC... Check the Hardware Infocenter or call IBM - no charge and should
help you relatively quickly.

Assuming you haven't plugged it in to a network with a DHCP server,
these are the default addresses on the ports.  But if the system has
been plugged-in and is on a network with DHCP, it's already grabbed Ips
and you need to do the control panel gig to figure out what they are.
If you plugged a cable in to HMC1 only, then the IP on HMC2 will still
be the default one.

192.168.2.147 <-- default on HMC1
192.168.3.147 <-- default on HMC2


--
Justin C. Haase - iSeries System Engineer
IBM Certified Systems Expert - System i
Kingland Systems Corporation

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of pnelson@xxxxxxxxxx
Sent: Monday, November 13, 2006 9:42 AM
To: Midrange Systems Technical Discussion
Subject: Re: System i5 first boot

You specify it yourself, through the CFGTCP menu