Removing a drive

["Douglas Palme" <dpalme@xxxxxxxxxxx>]

A few weeks ago I posted a message about replacing and removing drives from
one of my servers and several responses pointed me to using SST and another
option which I do not immediately recall.

 

I am using a 9409-170 2290.  I have a 7102 expansion unit which is not
currently attached and although I do plan on attaching it, I would like to
enable mirroring on the existing first two drives before doing so.  My
problem is this particular machine has three drives.  What I need to do is
move the data off of this drive onto the other two, remove it, and then add
two additional drives to mirror the 2 existing.  After that I will be
attaching the 7102 and expanding the capacity with mirroring.

 

What I have not been able to figure out is exactly what steps I need to take
to move that data off of the third drive onto the first two.

 

 

Drives 1 & 2 are 8GB drives (originally thought they were 4's but was
incorrect) and drive 3 is an 18GB drive.

 

Any help would be appreciated.

 

 



****************************************************************************
This transmission may contain information that is privileged,
Confidential and/or exempt from disclosure under applicable law.
If you are not the intended recipient, you are hereby notified that
any disclosure, copying, distribution, or use of the information
contained herein (including any reliance thereon) is STRICTLY
PROHIBITED. If you received this transmission in error, please
immediately contact the sender and destroy the material in its
entirety, whether in electronic or hard copy format. Thank you.
****************************************************************************