CPF8C27

["Norbut, Jim" <Jim.Norbut@xxxxxxxxxxxxxxx>]

When trying to do a WRKPRB and send a problem getting the following :
 
 
Message ID . . . . . . :   CPF8C27       Severity . . . . . . . :   10

Message type . . . . . :   Information

Date sent  . . . . . . :   11/16/06      Time sent  . . . . . . :
14:16:51   
 

Message . . . . :   Alternate load device not found.

Cause . . . . . :   Your system is not set up correctly to send requests
to    
  IBM Service. Information indicating the alternate load device
type/model =   
  0000/000 will be stored in the problem log.

Recovery  . . . :   Contact your hardware service representative and
have the  
  alternate device moved to the correct position, and try the request
again.   
Technical description . . . . . . . . :   The alternate load device is
not in  
  the position required for an initial program load (IPL).  The
alternate load 
  device must be on the disk/tape I/O Processor at Bus position 0, at
Card 1,  
  Board 0.

 
 
????
 
I have a 595 expansion unit for this LPAR
 
from left to right
 
C01      2844 Card
C02      2780 Card
C03      5780 Card
C04      5706 Card
C05      <empty>
C06      2844 Card
C07      5736 Card
C08      <empty>
 
 
 
 
----------------------------------- 
Jim Norbut 
Systems Administrator 
Grubb & Ellis Company 
500 West Monroe 
Chicago, IL 60661 
(312) 698-5620