Re: net work configuration problem V4R5MO

[Philipp Rusch <philipp.rusch@xxxxxxxxxxxxxxx>]

midrange@xxxxxxxxxxxxxxxx schrieb:
> Christopher Bipes wrote:-
>
>   
> >  First off make sure you have a live ethernet connection to the 2838
> > card.  Until you get that varied on, you will get no where.
> >     
>
> Are there some hardware tests or line test AS/400 commands to verify the
> card ethernet link or hardware controller functionality?
>
> Damian B
>   
Damian,

first thing:what kind of system is this ? Which slot is the card 
sitting, what is placed in the other slots ?
second: you were talking about an IPCS card, right ?
You are not trying to take an IPCS-controlled card as a normal interface 
card for OS/400 ???
If so, you need sspecial steps to make this card work for OS/400 ...
If not, you need to pull out the IPCS card and maybe put the 2838 card 
into a different slot or you
even need to put in a so called IOP to make that card work.
This depends on the kind of model and bus layout you have.

Regards from Germany,
Philipp