RE: QESECARE job

["Pete Massiello" <pmassiello-ml@xxxxxxxxxxxx>]

If you have updated to V5R4, you can change your connections and have a
Primary and Secondary. The primary can be Internet, and then the backup
connection can be the PPP modem of the 2793 (or equivalent) card.  You can
do this very easily under Universal Connection.  This will allow you to get
larger files when downloading PTFs.

I have found using the QESCARE job that you need patience, that is the key.


Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com



-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
ChadB@xxxxxxxxxxxxxxxxxxxx
Sent: Tuesday, June 12, 2007 11:06 AM
To: Midrange Systems Technical Discussion
Subject: Re: QESECARE job


Thanks Gustavo - the most info i've found yet!

If i'm seeing the QESECARE job run for a while at the high CPU with no
activity on the interactive SNDPTFORD, does that suggest that something is
not working with the newer connection type (HTTP/HTTPS) and then the
SNDPTFORD eventually falls back on on the 'older' style connection that was
in place before the cume was updated?   When I cancel the QESECARE job, I
see the interactive SNDPTFORD pick right up and complete quickly (like it
did before the cume).




                                                                           
             Gustavo Tejeda                                                
             Guillemin/Mexico/                                             
             IBM                                                        To 
             <gustavot@xxxxxxx         Midrange Systems Technical          
             .com>                     Discussion                          
             Sent by:                  <midrange-l@xxxxxxxxxxxx>           
             midrange-l-bounce                                          cc 
             s@xxxxxxxxxxxx            Midrange Systems Technical          
                                       Discussion                          
                                       <midrange-l@xxxxxxxxxxxx>,          
             06/12/2007 10:52          midrange-l-bounces@xxxxxxxxxxxx     
             AM                                                    Subject 
                                       Re: QESECARE job                    
                                                                           
             Please respond to                                             
             Midrange Systems                                              
                 Technical                                                 
                Discussion                                                 
             <midrange-l@midra                                             
                 nge.com>                                                  
                                                                           
                                                                           




QESECARE runs the Java code needed for the new SNDPTFORD and SNDSRVRQS
(connect over http/https, download images, etc). The reason of having to
have a different job rather than running in the same job where SNDPTFORD
was issued is due a restriction on i5/OS where a JVM can only be created
once in a job's life.

Hope this helps

"Mamma always said that life is like a box of chocolates... you never know
what you're gonna get."
    - Forrest Gump





ChadB@xxxxxxxxxxxxxxxxxxxx
Sent by: midrange-l-bounces@xxxxxxxxxxxx
12/06/2007 09:30
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
cc

Subject
Re: QESECARE job







Yeah, that's the only mention i've found about it... I think his posting
mentions it, but he hadn't found out what the job was all about.

Did you ever find out anymore info on the QESECARE job Lukas?




             Jerry Adams
             <jerry@bwwholesal
             e.com>                                                     To

             Sent by:                  Midrange Systems Technical
             midrange-l-bounce         Discussion
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>
                                                                        cc


             06/12/2007 10:27                                      Subject

             AM                        Re: QESECARE job


             Please respond to
             Midrange Systems
                 Technical
                Discussion
             <midrange-l@midra
                 nge.com>






Check the archives, Chad.  Lukas posted something about this awhile back.


             * Jerry C. Adams
*IBM System i Programmer/Analyst
B&W Wholesale Distributors, Inc.* *
voice
             615.995.7024
fax
             615.995.1201
email
             jerry@xxxxxxxxxxxxxxx <mailto:jerry@xxxxxxxxxxxxxxx>



ChadB@xxxxxxxxxxxxxxxxxxxx wrote:
> We just recently updated our V5R3 cume to C7121, and soon after doing so
> noticed that SNDPTFORD is behaving differently.  We now have a job that
> kicks off and runs at a high CPU usage for over 5 minutes called
'QESECARE'
> - the SNDPTFORD seems to hang until this job has run for a while.
>
> While testing the situation I ended the QESECARE job and found that the
> SNDPTFORD picked up and completely quickly at the point the QESECARE job
> ended.
>
> I can't find mention of QESECARE anywhere on IBM's knowledge base...
does
> anyone know what it does?

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.