RE: power cords for model 525

[ChadB@xxxxxxxxxxxxxxxxxxxx]

L6-30P is probably the plug type.



                                                                       
             "Harvell, Joel"                                           
             <jbharvell@foodli                                         
             on.com>                                                    To
             Sent by:                  "Midrange Systems Technical     
             midrange-l-bounce         Discussion"                     
             s@xxxxxxxxxxxx            <midrange-l@xxxxxxxxxxxx>   
                                                                        cc
                                                                       
             09/21/2007 09:19                                      Subject
             AM                        RE: power cords for model 525   
                                                                       
                                                                       
             Please respond to                                         
             Midrange Systems                                          
                 Technical                                             
                Discussion                                             
             <midrange-l@midra                                         
                 nge.com>                                            
                                                                       
                                                                       




If the rack is like the one that I installed recently then they mean
220v power.  The Male end of the plug was indeed the twist and lock type
plug, I can't remember what the electrical specs was.  The BP you bought
the system from should be able to provide you the electrical
requirements necessary for hookup.


Joel B. Harvell
Food Lion, LLC
(704) 633-8250 x2709
jbharvell@xxxxxxxxxxxx

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
franz400@xxxxxxxxxxxx
Sent: Friday, September 21, 2007 8:43 AM
To: midrange-l@xxxxxxxxxxxx
Subject: power cords for model 525

I will admit absolute confusion over various volt and amp specs.
The older systems (to me in US) were either 120 volt standard wall plug
or
208/240 big locking plug.
So the Info Center shows me plug & receptacle that say "250V 10 amp"
type 26.
The picture looks like a standard 3 prong power cord - what I called
"120".
This is putting a 525 with redundant power supplies, and 595 expansion,
both into a rack with a pdu, which then plugs to the data center floor
connections. And they are
asking 110v or 220v ????
Also, if each plug into pdu is 10A - do I need a total of 40A circuit
???
No electrician to talk to, just sales...
jim
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

**************************************************************************
This electronic message may contain confidential or privileged information
and is intended for the individual or entity named above.  If you are
not the intended recipient, be aware that any disclosure, copying,
distribution or use of the contents of this information is prohibited.
If you have received this electronic transmission in error, please notify
the sender immediately by using the e-mail address or by telephone
(704-633-8250).
**************************************************************************

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.