RE: Iseries to LAN printer setup

["Steve Dodkins" <Steve.Dodkins@xxxxxxxxxxxxxxx>]

Try the *HPPJLDRV or the *IBMSNMPDRV for the system drivers also look
at *HP5 for the printer type



-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Steve Moland
Sent: 29 February 2008 13:21
To: midrange-l@xxxxxxxxxxxx
Subject: Iseries to LAN printer setup

I'm trying to get a secondary development box model 800 V5R2 to print on
our 
lan printers.

I can get print stuff to come out using them as a remote queue but the
image 
is not rotated to landscape or with the small font so that the whole
page 
prints on the paper.

It's been years since I set up the same printers on our 170 where they
work 
and print just fine.

I thought I had saved the command line stuff to set up the printers but
it 
seems what I have is wrong OR there is some other step I haven't done OR

some setting on the 800 that needs to be changed.

Here is what I used.

CRTOUTQ OUTQ(QUSRSYS/API2100) RMTSYS('ntas1.apihq.com') RMTPRTQ(HP2100)
AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE(*OTHER) MFRTYPMDL(*HP4) SEPPAGE(*NO)
TEXT('HP2100 on API lan')

After I run this, I check the descriptions of the objects created
against 
those on the 170 and they "appear" to be identical.

What as I missing.

Steve