Re: Modernizing a 150 - need some documentation

[Keith Carpenter <entropypool@xxxxxxxxx>]

vhamberg@xxxxxxxxxxx wrote:
> Almost there - a supplier for the drives says he does not have the rails - are there supposed to be any? I can't see anything on the 6607, at least, that looks like rails. But these are the 6713s. So maybe you know.

No rails needed.  Just screws for drives 1,2&3 (cage). The 4th drive 
uses the bracket you previously described.

6607 and 6713 drives are physically similar (jumpers, mountings). The 
exception is the 2/3 height drive (6713 DCHS 8gb) which is harder to 
install because of it's size.  The more common DGHS 8gb look the same as 
the 4gb drive (1/2 height).

You must jumper the SCSI addresses manually. The chart on the inside of 
the left panel tells you what they should look like for each device.

Keith