Re: IBM 6400 Config Settings

[Pat Barber <mboceanside@xxxxxxxxxxxxxxxx>]

Depends on the model but most of the 6400 printers allowed you to
have several "profiles" for various connection methods. That group
of setting is stored using various save key sequences.

Have you checked the manual ?

http://www-01.ibm.com/support/search.wss?rs=95&lang=all&tc=SRMSVP&dc=DA410+DA450&dtm



Harvell, Joel wrote:
> I need to change the IP address on an IBM 6400 printer.  I changed the
> TCPIP settings on the printer itself and confirmed those settings from
> the HTTP interface.  The printer has been rebooted and reset.  However
> the Old IP address is still active and the new IP address is
> unavailable.  But If I log onto  the HTTP config I see the new IP
> address listed.  How do I get the printer to start using the new IP
> address
>
>  
>
> Thanks
>
>  
>
>  
>
> Be seeing you...*
>
>  
>
> Joel B. Harvell
>
> Food Lion, LLC
>
> (704) 633-8250 x2709
>
> jbharvell@xxxxxxxxxxxx
>
>  
>
>
> **************************************************************************
> This electronic message may contain confidential or privileged information
> and is intended for the individual or entity named above.  If you are 
> not the intended recipient, be aware that any disclosure, copying, 
> distribution or use of the contents of this information is prohibited. 
> If you have received this electronic transmission in error, please notify 
> the sender immediately by using the e-mail address or by telephone
> (704-633-8250).
> **************************************************************************
>