Hi
I am trying to start my SMTP server but it stops after 1 second with the message below. I've used the set up instructions from here
http://search400.techtarget.com/news/article/0,289142,sid3_gci968106,00.html# and they are copied below the error message
Message ID . . . . . . : CPF1164 Severity . . . . . . . : 00
Message type . . . . . : Completion
Date sent . . . . . . : 24/11/08 Time sent . . . . . . : 08:20:18
Message . . . . : Job 919710/QTCP/QTSMTPSRVD ended on 24/11/08 at 08:20:18;
1 seconds used; end code 0
X.
Cause . . . . . : Job 919710/QTCP/QTSMTPSRVD completed on 24/11/08 at
08:20:18 after it used 1 seconds processing unit time. The job had ending
code 0. The job ended after 1 routing steps with a secondary ending code of
0. The job ending codes and their meanings are as follows:
0 - The job completed normally.
10 - The job completed normally during controlled ending or controlled
subsystem ending.
20 - The job exceeded end severity (ENDSEV job attribute).
1. Enter command CFGTCP
2. Choose option "20. Configure TCP/IP applications"
3. Choose option "12. Configure SMTP"
4. Choose option "3. Change SMTP attributes"
5. Set value "Autostart server . . . . . . . . *YES"
Automatic registration . . . . . *NO
User ID prefix . . . . . . . . QSM
Address . . . . . . . . . . . QSMRMTAD
System name . . . . . . . . TCPIP
Alias table type . . . . . . . *SYSTEM
Mail router . . . . . . . . . . 'mymailserver@xxxxxxxxxxx'
('mymailserver@xxxxxxxxxxx' is the DNS name of your mail server, please check first locally which DNS name and TCP/IP address you'll have to use.)
The local mail server DNS name and IP Address has in any case to be added into the local iSeries TCP/IP Host table using command CFGTCP and option 10. Work with TCP/IP host table entries.
In our configuration we've added Internet address 111.11.111.111 with Host
Name 'mymailserver@xxxxxxxxxxx'
6. Add following 2 entries in the Directory Entries table:
ADDDIRE USRID(INTERNET GATEWAY)
USRD('Context switching entry')
SYSNAME(TCPIP)
MSFSRVLVL(*USRIDX)
PREFADR(NETUSRID *IBM ATCONTXT)
ADDDIRE USRID(QSMTPDMY QSMTPSYS)
USRD('QSMTP user')
SYSNAME(TCPIP)
MSFSRVLVL(*USRIDX)
7. For each DIRE user you want to send an e-mail to, change his entry using command (here an example for my own profile on system BASLE.)
CHGDIRE USRID(USERNAME BASEL)
USER(USERNAME)
NETUSRID('USERNAME BASEL')
USRDFNFLD((SMTPAUSRID SMTP 'firstname.lastname') (SMTPDMN SMTP 'company.com'))
MSFSRVLVL(*SYSMS) PREFADR(*SMTP)
firstname.lastname is the part from your email address before the "@" character company.com is the part from your email address after the "@" character
8. Use command CHGTCPDMN to set
* HOSTNAME to BASEL (BASEL is an example; enter your system name here.)
* DMNNAME to company.com (company.com is an example; enter here your company domain name.)
To send an e-mail use the following command:
SNDDST TYPE(*MSG)
TOUSRID((USERNAME BASEL))
z DSTD('Description text')
MSG('Message text')
To send e-mails to users not defined in WRKDIRE change once the Distribution Attributes using this command:
CHGDSTA SMTPRTE(INTERNET GATEWAY)
Up to now, you can use following command (Information type has to be set to *LMSG) to send directly to an Internet address:
SNDDST TYPE(*LMSG)
TOINTNET(('reciepient email address'))
DSTD('Description text')
MSG('Message text')
LONGMSG('Long message text')
Regards
Steve Dodkins
I.T Manager
ebm-papst UK Ltd
Chelmsford Business Park,
CM2 5EZ Chelmsford,
UK
Tel: +44 (0) 1245 468555
Dir: +44 (0) 1245 456510
steve.dodkins@xxxxxxxxxxxxxxx
www.ebmpapst.co.uk
___________________________
midrange.com
